Table of Contents
Advertisement
Fig 18
Fig 20
Fig 19
1. Place Appliance: Position the appliance according to the manufacturer's
instructions. It is a good idea to try to position the appliance so it will allow the
chimney to line up centered between studs.
2. Locate, Cut & Frame Opening: Determine the location where the chimney
will pass through the wall. The chimney should pass through the wall, centered
between two studs. The height of the penetration can be determined by
positioning sections of stove pipe until you have the desired configuration
(refer to the appliance manufacturer's installation instructions for
restrictions
14
Advertisement
Table of Contents
