Polaroid PDM-2727 Manual page 37

PROBLEM
There is no picture.
Poor AV performance.
The remote control
does not work
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, unplug the power-supply cord and then plug it into the outlet again to
reset the player. If the problems still exist, cut off the power supply and consult your service
center or the qualified technician.
Troubleshooting
POSSIBLE CAUSE
The LCD may be off or not
be in correct video mode.
The system connection may
be not correct.
The unit may be not in AV
out mode.
The disc may be dirty or
warped.
There may be
obstructions between the
remote control and
player.
The remote control may not
be pointed at the player.
The batteries of remote
control may not be inserted
correctly.
The batteries of remote
control may be out of power
or weak.
37
POSSIBLE SOLUTION
Turn on the LCD and choose
the correct video mode.
Connect
correctly.
Switch AV tab on the bottom
of the unit to out.
Clean or change the disc.
some
Remove the
between the remote control
the
and the player.
Point the remote control at
the player directly.
Make sure the polarity of
each battery is correct.
Replace the batteries.
the system
obstruction