Engine Troubleshooting
Problem
Noise in drive
system
Poor low RPM
performance
Engine doesn't
start (electric
start models)
Engine doesn't
turn
Probable Cause
Broken drive clutch
components
Bearing failure/ chain-
case, jackshaft, or front
drive shaft
Drive belt surface flat
spots
Drive chain loose or
worn, sprocket teeth
broken
Worn drive belt
Excessive belt/sheave
clearance
Loose torque stop
Sticky clutch
Wire connections
Seized engine
Hydrostatic lock
TROUBLESHOOTING
Solution
• SEE YOUR DEALER.
• SEE YOUR DEALER.
• Inspect and replace if necessary.
• Inspect and adjust or replace.
• Inspect and replace if necessary.
• SEE YOUR DEALER.
• Inspect and adjust.
• SEE YOUR DEALER.
• SEE YOUR DEALER.
• SEE YOUR DEALER. Seizure is a
result of poor lubrication, inadequate
fuel supply, broken parts, or improper
cooling.
• Fuel may have entered crankcase
while vehicle was standing or being
transported. SEE YOUR DEALER to
correct cause. Drain plug(s) are
located on lower crankcase for emer-
gency draining.
109