1. Manuals
  2. Brands
  3. pyrexx Manuals
  4. Gateway
  5. PX-iP
  6. Operating manual

pyrexx PX-iP Operating Manual

Hide thumbs Also See for PX-iP:
Table of Contents

Advertisement

Quick Links

Download this manual
P X - iP
Operating Manual
Gateway

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PX-iP and is the answer not in the manual?

Questions and answers

Related Manuals for pyrexx PX-iP

Summary of Contents for pyrexx PX-iP

  • Page 1 P X - iP Operating Manual Gateway...

  • Page 2: Table Of Contents

    3 Overview 4 Commissioning and setting up 5 Reset 6 Installation variants 7 Notification 8 Troubleshooting 9 Maintenance 10 Decommissioning 11 Accessories, spare parts and service 12 Glossary 13 Technical specifications 14 Alarm and alert tones Operating Manual: PX-iP - Gateway...

  • Page 3: Notes On The Operating Manual

    The current version of this ating manual is read and understood. manual is available at: For a better readability, the PX-iP gateway is pyrexx.com/de/support/downloads hereinafter referred to as "gateway" or "device" and the smoke alarm device with radio link is referred to as "smoke alarm device".
  • Page 4 Pyrexx Technologies GmbH declares that stallation, please contact our product the PX-iP gateway is compliant with the support via +49 30 8871 606 641. fundamental requirements and other rele- You can reach our product support...
  • Page 5 Additional information and guidelines Delete (1) Numbered action steps Main menu f Symbol for an instruction or a required action 5 Result of an action 4 Problem associated with an action Symbol for a list • Operating Manual: PX-iP - Gateway...

  • Page 6: Limited Warranty

    Pyrexx Technologies GmbH di- 1.8 Warranty exclusion criteria rectly, or through an authorized reseller, for a Physical/mechanical damage period of 2 years from the date of purchase.
  • Page 7 If the device has been exposed temporari- and therefore if the warranty claim is ly or continuously to a temperature below justified or unjustified. 0 °C or above 70 °C, any warranty claim shall be forfeited. Operating Manual: PX-iP - Gateway...
  • Page 8 Pyrexx Technologies GmbH the law; the after-sales services shall be shall be limited to the purchase price of limited to the duration of this warranty. the device. Operating Manual: PX-iP - Gateway...

  • Page 9: Safety Instructions

    Note the following when using the gateway: f Only use the device with the power unit and power cable provided f Use the device only as intended and in a technically perfect condition Operating Manual: PX-iP - Gateway...
  • Page 10 (e.g., failure of the Internet Any use that is not expressly • connection). described as permitted in this operating manual Exceptions to the above require a writ- ten agreement with the manufacturer. Operating Manual: PX-iP - Gateway...

  • Page 11: Data Security

    Observe the instructions "Re- of your smartphone, the gateway placing the rechargeable battery" or the smoke alarm device in the FAQ On request, Pyrexx product support • will delete your data from its IT system Operating Manual: PX-iP - Gateway...
  • Page 12 Nicotine and paint fumes • Paint finishes (e.g., wall paint) • Adhesives • Contamination of any kind • f Do not open the device Exception: f See chapter “Replacing the re- chargeable battery” on page 11 Operating Manual: PX-iP - Gateway...
  • Page 13 T h e d e v i c e c o n s i s t s o f s e n s i t i ve components. f Do not throw the device f Do not let the device fall Do not exert any pressure on the device Operating Manual: PX-iP - Gateway...

  • Page 14: Overview

    3 Web app The gateway is controlled via buttons 4 "Apartment" with gateway, with signal LEDs. You must be able to see smoke alarm device and router the light signals, even when the buttons are activated. Operating Manual: PX-iP - Gateway...
  • Page 15 2 Radio button (A) with signal LED Switch-off after unplugging the • 3 Gateway button (B) with signal LED power cable on the device 4 Port for the power unit Resetting the connection • 5 LAN port settings to the router Operating Manual: PX-iP - Gateway...

  • Page 16: Commissioning And Setting Up

    4.1 Requirements for commissioning the router via the LAN cable. It is strictly Prior to commissioning, ensure the follow- required for the installation. ing at the installation location: Internet connection • Router with LAN port • Operating Manual: PX-iP - Gateway...
  • Page 17 (1) In the start-up screen, enter If you do not have access to the web app user name (email) and password yet, set up your user account first. (2) Click "Log in" Web app log-in successful 5 Empty device list appears Operating Manual: PX-iP - Gateway...
  • Page 18 LAN cable (5) Select LAN and WI-FI connection For a more stable installation, we recommend the LAN connection. f For a WI-FI connection enter the WI-FI parameters and click "Save" Operating Manual: PX-iP - Gateway...
  • Page 19 While the gateway is starting up the (4) Click "Installation complete" LEDs of the gateway button (B) and the radio button (A) become active You are now in the room sketch in that order: Gateway starts: Gateway parameter query: Operating Manual: PX-iP - Gateway...
  • Page 20 Starting learning mode on the smoke Star ting learning mode on the alarm device: gateway: 5 Radio group in learning mode for 5 Gateway is in the learning mode for another 10 minutes 10 minutes max. Operating Manual: PX-iP - Gateway...
  • Page 21 (5) Click "Network scan complete" In the event of an error, see chapter 7.7 “Connection to smoke alarm device lost” on page 33 (6) Click "Gateway functions" title, then click "Radio group" button 5 You are now in the "Radio group" menu Operating Manual: PX-iP - Gateway...
  • Page 22 All notifications are always sent to the us- er who created the apartment in the web (5) Click "Test signal complete" app. The email address and mobile phone number can be changed in the web app (see FAQ). Operating Manual: PX-iP - Gateway...
  • Page 23 (1) With a smartphone, check whether GSM reception exists at the installa- (7) Relay user data to the new user tion site of the gateway (2) Change the location of the gateway if necessary Operating Manual: PX-iP - Gateway...
  • Page 24 When it is switched off, no alarms will be forwarded, not even via GSM. When you reconnect the power cable, the gateway is placed in service again. You will receive an email stating "Gateway is again reachable". Operating Manual: PX-iP - Gateway...

  • Page 25: Reset

    Cyclic acoustic signal on the 5 Gateway is switched off gateway for 30 seconds During this time, perform the follow- ing steps in the sequence specified: (2) Reset radio module f Press radio button (A) on the gate- way until it flashes, then release Operating Manual: PX-iP - Gateway...

  • Page 26: Installation Variants

    (3) Press radio button with splint pin until it flashes, then release Starting learning mode on the gateway: 5 The device is in its default state 5 The learning mode is active for 10 minutes, the signal LEDs on all installed smoke alarm devices flash Operating Manual: PX-iP - Gateway...
  • Page 27 While the gateway is starting up the (2) Release the radio button as soon as LEDs of the gateway button (B) and the LED goes out the radio button (A) become active in that order: Operating Manual: PX-iP - Gateway...
  • Page 28 There are several options for gate- way-to-gateway switching in the web app: 5 Radio group is in operation Selected functions always refer to the 5 No device in the radio group is gateway on which the functions are flashing activated. Operating Manual: PX-iP - Gateway...
  • Page 29 You can choose from the following with all smoke alarm devices. options: No forwarding • Outgoing and incoming • Only outgoing • Only incoming • Outgoing and incoming • in residential building Incoming in residential building • Operating Manual: PX-iP - Gateway...
  • Page 30 While the gateway is starting up the f Release the radio button as soon as LEDs of the gateway button (B) and the LED goes out the radio button (A) become active in that order: Gateway starts: Operating Manual: PX-iP - Gateway...
  • Page 31 5 Router connection is changed No device in the radio group A network scan (see chapter 4.9 is flashing “Network scan” on page 21) is (8) Observe the installation steps in not required, however to be certain, chapter 4.7 “Connect the gateway” on it should be executed. page 19 Operating Manual: PX-iP - Gateway...

  • Page 32: Notification

    You get the fault message as soon as the 4 Gateway button (B) flashes as long regular signals of the gateway are not re- as battery operation continues ceived for 10 minutes. Possible causes are described in chapter 8.6 “Error in a radio function (gateway reacha- bility)” on page 42. Operating Manual: PX-iP - Gateway...
  • Page 33 Smoke alarm devices that have • been added have been mounted too far away from, or too close to existing smoke alarm devices The initial installation was faulty, • this is particularly possible for installations without a gateway Operating Manual: PX-iP - Gateway...
  • Page 34 DIN 14676. unit. This message will be repeated month- ly until the executed maintenance has been documented in the web app. Operating Manual: PX-iP - Gateway...
  • Page 35 For example, this is the case when one of the above mentioned alarm devices is no longer in its intended installation location or if it is painted over during renovation work. Best regards, Your Pyrexx team Operating Manual: PX-iP - Gateway...

  • Page 36: Troubleshooting

    Serial number belongs to a • correctly connected gateway of another manufacturer Maintenance data will only • Remedy: be read out if a network scan f Install the gateway with the app of was executed beforehand the third-party manufacturer Operating Manual: PX-iP - Gateway...
  • Page 37 (5) Set up the gateway again web app (see chapter 4.7 “Connect the Possible causes: gateway” on page 19) No LAN connection or • (6) After establishing a WI-FI connec- faulty LAN connection tion the LAN cable can be removed Operating Manual: PX-iP - Gateway...
  • Page 38 A reset was not executed on the • (2) Correct the position of the smoke smoke alarm device prior to activation alarm device 4 Radio button (A) is briefly illuminat- (3) Activate smoke alarm device ed green Smoke alarm device in learning mode Operating Manual: PX-iP - Gateway...
  • Page 39 Radio group not in learning mode (2) Replace defective smoke alarm device (3) Re-teach the replaced smoke alarm 4 Signal LEDs of the smoke alarm device (see chapter 4.7 “Connect devices are no longer flashing the gateway” on page 19) Operating Manual: PX-iP - Gateway...
  • Page 40 • Signal LED of radio button (A) was not in default state “Off ” 4 Radio button (A) is briefly illuminat- (2) Return the radio group to learning ed green mode (see chapter 6.7 “Installation of the gateway in an existing radio group” on page 30) Operating Manual: PX-iP - Gateway...
  • Page 41 (2) Replace defective gateway 10 minutes (see chapter 4 “Commissioning and setting up” on page 16) (4) Briefly press radio button (A) on the gateway (3) Dispose of old device (see chapter 10.1 “Disposal” on page 49) Signal LED of radio button (A) “Off ” 5 Radio group is extended Operating Manual: PX-iP - Gateway...
  • Page 42 (see chapter 4.14 “Switch- “Off ” ing off the gateway” on page 24) Power outage • Remedy: Network power plug is unplugged • f No additional measures are and no emergency reserve required (rechargeable battery of the gateway is dead or defective) Operating Manual: PX-iP - Gateway...
  • Page 43 (2) Check LAN cable and replace if (3) Restore power supply necessary (4) Restart router (3) Set up gateway connection again (5) Replace router if necessary (see chapter 4.6 “Set up the gate- (see FAQ) way” on page 18) Operating Manual: PX-iP - Gateway...
  • Page 44 (4) If the error persists, contact product gateway for 30 seconds support (see chapter 11.2 “Product support” on page 49) (5) If a solution cannot be found, during the warranty period, send defective gateway with purchase receipt back to the manufacturer Operating Manual: PX-iP - Gateway...
  • Page 45 • radio-based devices (1) Ensure that the gateway is connected to the router (see chapter 7.3 “Con- Remedy: nection to gateway lost” on page 32) f Repeat network scan (see chapter 4.9 “Network scan” on (2) Repeat network scan page 21) (see chapter 4.9 “Network scan” on page 21) Operating Manual: PX-iP - Gateway...
  • Page 46 (see chapter 4.8 “Creating a radio group with gateway and smoke alarm devices” on page 20) (1) Reset and set-up the radio group again with replacement device (2) Repeat network scan (see chapter 4.9 “Network scan” on page 21) (3) Dispose of old device (see chapter 10.1 “Disposal” on page 49) Operating Manual: PX-iP - Gateway...
  • Page 47 (see chapter 4.7 “Connect the gateway” on page 19) (4) Set up radio group again (see chapter 4.6 “Set up the gate- way” on page 18) (5) After each added smoke alarm device execute a network scan for verification (see chapter 4.9 “Net- work scan” on page 21) Operating Manual: PX-iP - Gateway...

  • Page 48: Maintenance

    The radio button (A) on the • Do not press the radio button (A) or gateway is illuminated green the gateway button (B) by mistake The gateway button (B) on the • gateway is illuminated green and flashes every 10 seconds Operating Manual: PX-iP - Gateway...

  • Page 49: Decommissioning

    10777 Berlin Germany +49 30 8871 606 641 Product suppor t can be reached via "Contact" in the login screen of the web app. pyrexx.com/de/support You can find explanatory videos about our products at pyrexx.com. Operating Manual: PX-iP - Gateway...

  • Page 50: Glossary

    In this process it reads-in the measured data of the connected smoke alarm device: Temperature • Contamination • Battery level • Smoke density • Signal level • The measured data are regularly and au- tomatically updated after the network scan. Operating Manual: PX-iP - Gateway...

  • Page 51: Technical Specifications

    Refrigerator white Material Dimensions (L x W x H) 10 x 10 x 3.6 cm Weight 210 g net 470 g gross weight (as delivered) Operation Browser, web app Update capability Via WI-FI and LAN Operating Manual: PX-iP - Gateway...
  • Page 52 R&TTE Directive, ISM-band, WI-FI, GSM Data encryption AES256 Maximum number of networked nodes 15 (including PX-iP) per group Maximum number of networked radio groups with PX-iP Radio range 400 m (± 10 %) on open transmission field Operating Manual: PX-iP - Gateway...

  • Page 53: Alarm And Alert Tones

    Lastly, 1 second continuous tone Moderately loud Power plug re- 60 seconds moved or Power 1 second, outage Start can take up to 2 minutes. Moderately loud Network reset No interval successful 1 second continuous tone Moderately loud Operating Manual: PX-iP - Gateway...

  • Page 54: Legal Notice

    Legal notice Pyrexx Technologies GmbH © Pyrexx Technologies GmbH Spichernstraße 2 k_137034 Revision of the brochure 2016-10 10777 Berlin Germany...

Table of Contents