Polaris Trail Boss 330 Quadricycle Owner's Manual page 43

Controls/Instruments
(3) Engine Stop Switch
Move the stop switch to the
OFF position to stop the
engine. All electrical power to
the vehicle will end. The
engine will not start or run
when the switch is in the OFF
position.
Move the stop switch to the
ON (RUN) position before
attempting to start the engine.
(4) Light Switch
Toggle the lights from high beam to
low beam.
NOTE: The lights do not operate
unless the main key
switch is on and the
engine stop switch is in
the RUN position.
(5) Throttle lever
Press the throttle lever to
increase engine speed and
vehicle movement. Release
the lever to reduce engine
speed and vehicle movement.
WARNING
Failure to check or maintain proper operation of the throttle
system can result in an accident if the throttle lever sticks during
operation. Check the lever for proper operation before starting the
engine. Check occasionally during operation.
Do not start or operate a Quadricycle with sticking or improperly
operating throttle controls.
Contact your dealer for repair if throttle problems arise.
FEATURES AND CONTROLS
OFF
(4)
OFF
(5)
(3)
41