Setting Instructions - Bertucci Performance Watch Owner's Manual

Setting Instructions:

(See illustrations on opposite page)
Winding The Mainspring (for initial use or after several days of non use):
Manual wind by turning the setting crown in
times clockwise until second hand starts to move. Gently handle the setting
crown. After this initial winding the watch will automatically self wind based
on the movement of your wrist.
Setting Date:
Pull crown out gently to
crown clockwise. Note: Advance the date to yesterday's date, then adjust
the time to cycle past midnight, you will see the date advance to today's
date. Continue to advance to the desired time, this will ensure the AM/PM
is correct.
Setting Time:
Pull crown out gently to
"B"
position, adjust the date by rotating the
"C"
position and adjust the time.
"A"
position. Wind 15 to 20
5