Panasonic VL-SW274 Quick Manual page 3

Graphical symbols for use on equipment and their descriptions
1 2
7 8
1. Alternating current (A.C.) 2. Direct current (D.C.) 3. Protective earth 4. Protective bonding earth 5. Functional
earth 6. For indoor use only 7. Class P equipment (equipment in which protection against electric shock relies on
Double Insulation or Reinforced Insulation) 8. "ON" (power) 9. "OFF" (power) 10. Stand-by (power) 11. "ON"/"OFF"
(power; push-push) 12. Caution, risk of electric shock
1.4 Symbols, expressions, and styles
The following symbols, expressions, and styles are used in this document.
Item
Text displayed on the
product's display
Icons displayed on the
product's display
Buttons with printing on
them or near them
Soft keys
Navigator key (sub
monitor only)
Procedures
3
9
How it is expressed
Text is displayed in a special
font, usually enclosed in
quotation marks
Black-and-white illustration of
icon is used
Button printing is displayed,
usually wrapped in thick
brackets
Black-and-white illustration of
the corresponding soft key icon
is used
Either referred to by name, or
with a black-and-white
illustration
Usually written in an abbreviated
style. The verb may be omitted.
Unless otherwise stated, all
procedures are for both the main
monitor, extension monitor, and
sub monitor.
4 5
10 11
Example
"Initial settings"
M N
M N
R "Use the navigator key to select..."
R "Press
R "Select..."
Main monitor/extension monitor example
→ "Display" →
"Brightness"
R Meaning:
Press the soft key under the displayed
soft key icon, press the soft keys
under the displayed
soft key icons to select "Display", press
the soft key under the displayed
key icon, and then press
"Brightness".
Sub monitor example
N → "BRIGHTNESS" →
M
select the desired setting.
R Meaning:
Press the M
key to select "BRIGHTNESS" on the display,
and then press the navigator key
1. Introduction
6
12
to select..."
→
and
to select
(OK) →
N button, use the navigator
soft
(OK).
3