Headset Features - Plantronics calisto User Manual

Headset Features

Plantronics Calisto Headset
Before using, you must first charge your headset (see instructions in initial setup section). For the best user experience,
always keep your headset fully charged.
Pairing headset with your mobile phone
Before you begin, be sure your mobile phone has Bluetooth headset
-
capability.
Turn Calisto headset off by holding down the headset button for 6
-
seconds, or until red light appears solid for 1 second before going away.
Reference your mobile phone user's manual to activate Bluetooth signal
-
on your phone.
To begin headset pairing, hold down button on headset until you see
-
alternating red and blue flashes.
While the headset is flashing red and blue, use the phone menu to search
-
for Bluetooth devices and select PLT_CALISTO
When mobile phone detects Calisto headset it will ask for a pas code.
-
ENTER PASSCODE: 0000
-
Your Calisto headset is now paired with your mobile phone and is ready for use
-
NOTE: The headset can pair to multiple Bluetooth devices, but will only connect to one device at a time. The
headset will automatically connect to the last device to which it was connected.
Placing mobile calls using headset
Dial the number on the mobile phone and press the headset button to transfer the call to the headset.
-
Some mobile phones require the user to first accept the headset connection.
To end the call, press the headset button again or end the call on the mobile phone
-