Entering Text - Pioneer SX-N30AE Instruction Manual

> Before Start > Part Names

Entering text

Text entry, for passwords, etc., uses the
following procedure.
a
b
14
> Install > Initial Setup
1. Select the characters or symbols with
Up/Down/Left/Right (a).
a b c d e f g h i j k l m
2. Press ENTER (a) to confirm the selected
character. Repeat this to enter text.
0 Press CAPS (b) to change the
characters to be enter, for example to
switch between upper and lower case.
0 Press CLR (c) to delete all the input
characters.
3. After completing input, select "OK" with
Up/Down/Left/Right (a) and press
ENTER (a).
c
A / a B S O K
Characters that can be entered
Space: A single space the size of a
character is entered.
A/a: Switches between characters
displayed. (a A)
 (left) / (right) : Select to move the
> Playback
Supplementary information | Advanced Setup | Others
cursor.
BS (backspace): Removes a character on
the left of the cursor. The cursor moves left.
OK: Confirms the entered content.