Level Surface Calibration; Flight Practice; Performing A 360º Flip; Trouble Shooting Your Cloud Rider™ Hd 2.0 - Propel RC CLOUD RIDER HD 2.0 Instruction Booklet And Warning

LEVEL SURFACE CALIBRATION

may need to restabilize the internal gyros.
Drone battery. Place the Cloud Rider™ HD 2.0 on a
flash a bit and then remain solid. This indicates that
your drone has been calibrated.
FLYING ENVIRONMENT
The Cloud Rider™ HD 2.0 is designed for outdoor use only. Pick a day of
WARNING:

FLIGHT PRACTICE

maneuvers. Good luck and have fun!
Fixed-point landing Square Pattern Maneuver
PERFORMING 360º FLIPS
After you have mastered flying the Cloud Rider™ HD 2.0 you are ready to try flips. Once the Cloud Rider™
NOTE:
11
R
Cross Pattern Maneuver
S
U
Flip Left
TROUBLESHOOTING YOUR CLOUD RIDER™ HD 2.0
PROBLEM POSSIBLE REASON
2. Polarity is reversed
No Power
3. Batteries may be dead
Remote Not
2. Cloud Rider™ HD 2.0 battery is not connected
properly
Responding
4. The remote is not synced
Aircraft Won't
lift off
2. Aircraft not fully charged
Aircraft
1. Moving the throttle too quickly
Descends
Too Fast
1. Gyroscope not functioning
Aircraft Not
Responding
Loss of
Cloud Rider™ HD 2.0
1. Aircraft is out of range of remote
Control
T
Flip Right
SOLUTION
2. Make sure all batteries are installed
correctly (see diagram B)
3. Replace batteries
2. Connect the battery to Cloud Rider™ HD 2.0
3. Windy conditions severely impair the
operation of the Cloud Rider™ HD 2.0
4. Re-sync the remote
2. Recharge your Cloud Rider™ HD 2.0
smoother
1. Turn ON the Cloud Rider™ HD 2.0 and
Reset the Gyro (see diagram R)
feet radius of the remote
12