Table 41 Tightening Torque (72011) - ABB A140-H55 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
8 Dismantling and fitting Page 94 / 115
Installing the compressor casing
Figure 48: Installing the compressor casing
Part number A130 A135 A140
72011 M8 M10 M12
35 Nm 70 Nm 105 Nm
Table 41: Tightening torque (72011)
Always replace the O-ring (42012) (see chapter Spare parts).

1. Thoroughly clean the fastening strips (72012) before assembly.
2. Attach swivel lifting eyes (01) to the compressor casing (72000) and lifting gear.
3. Install the compressor casing (72000).
4. Install the fastening strips (72012) with screws (72011).
© Copyright 2015 ABB. All rights reserved. HZTL4030_EN Revision C September 2015