Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 66. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Transmission Oil Polaris AGL Synthetic
Demand Drive
Fluid (Front
Gearcase)
ADC Fluid
Front Prop Shaft
Yoke
Lube
PS-4 PLUS Performance
Synthetic 2W-50
DOT 4 Only
Gearcase Lube
Demand Drive LT
Premium Fluid
Polaris ADC Fluid
Polaris Premium U-Joint
Lube
Capacity at
Fluid Change
2 qt. (1.9 l)
---
32 oz. (948 ml) See page 77.
9.3 oz. (275 ml) See page 79.
---
---
Front Prop Shaft Yoke
MAINTENANCE
Inspection
Procedure
See page 72.
See page 30.
See page 81.
Grease fittings (3
pumps maximum) every
500 miles, before long
periods of storage, or
after pressure washing
or submerging.
71