Page 1 Contents/Precautions L-01G ‘14.X Before Using this terminal ISSUE DATE: Setting Up NAME: PHONE NUMBER: Connecting to the Internet MAIL ADDRESS: Settings (Web browser) INSTRUCTION MANUAL Settings (setting menu on this terminal) Overseas Use Charging Mobile Devices Appendix/Troubleshooting...
Page 2 Before or while using, read this manual thoroughly to ensure you use correctly. Operation description Download the latest information of this manual from DOCOMO website. ■ "L-01G Setting Up Manual" (Japanese) (Supplied accessory) It describes how to connect this terminal with PC, etc.
Page 3: Supplied Accessories
Converter Cable for Supplied Accessories Charging L02 About other optional accessories and related equipment → P132 L-01G Terminal (with Back Cover LXX warranty) Battery Pack LXX L-01G INSTRUCTION MANUAL (Japanese) USB Cable L03 L-01G Setting Up SSID/Security sticker Manual (Japanese) かんたんセッ...
Page 4: How To Read This Manual
• Any reprint of this manual is prohibited. • This manual is subject to change without prior notice. • Please note that "this terminal" indicates "L-01G" in this manual. • In this manual, the operations are described by illustrations and marks to ensure the correct usage of this terminal.
Page 5: Table Of Contents
Before Using this Terminal …………… 31 (L-01G Connection Manager) …………………… 79 Part Names and Functions ………………………… 31 Conﬁ rming Connection State or Setting State of Using docomo mini UIM card ……………………… 33 this Terminal …………………………………………… 82 Attaching/Removing Battery Pack ……………… 36 Setting Provider ……………………………………… 84 Charging …………………………………………………...
Page 6 Settings for using overseas ……………………… 128 Charging Mobile Device ……………… 130 Charging Mobile Device …………………………… 130 Appendix/Troubleshooting …………… 133 L-01G Connection Manager menu item setting item list ………………………………………………… 133 Introduction of Options and Related Devices … 141 Troubleshooting ……………………………………… 142 Error message …………………………………………...
Page 7: About Usage Of This Terminal
FOMA HIGH-SPEED Areas. be diﬃ cult to connect network. Especially for • This terminal uses only docomo mini UIM card. customers who uses a large amount of data Bring your UIM/FOMA card to a docomo Shop to (1 GB or more for last three days, including the exchange it.
Page 8 Xi/FOMA service contract line, together with usage fee of Internet service provider such as a corresponding provider "mopera U" of docomo are charged. For information about application of "mopera U", service contents and setting method, view homepage of "mopera U"...
Page 9: Basic Operations
• Connecting to IEEE802.11a/g/maximum 54 Mbps • Connecting to IEEE802.11b/maximum 11 Mbps When accessing to the Internet, maximum 150 Mbps for receiving/maximum 50 Mbps sending. Only a part of Xi areas. • For details about compatible areas, please visit DOCOMO website. Contents/Precautions...
Page 10: Wireless Lan
( → P71 "Connecting to Wi-Fi compatible device condition. supports WPS"). • When using overseas, communication speed • Use L-01G Connection Manager to restrict changes depending on the overseas operator or the number of devices available to connect. the network you use.
Page 11: Public Wireless Lan
When using an access point compatible to Simple Operations of Touch Panel Xi data communication (LTE) or FOMA data communication (3G), such as docomo Internet From the simple operations of touch panel, the connection service of mopera U, speed of data...
Page 12: Safety Precautions (Always Follow These Precautions)
This sign indicates that Safety Precautions (ALWAYS incorrect handling poses FOLLOW THESE PRECAUTIONS) CAUTION a risk of causing slight injury or damage to the ■ Before using this terminal, read these product or property. "Safety Precautions" carefully so that you can use it properly.
Page 13 Precautions for Adapter, USB Cable and Converter Cable for Charging ………………… P18 Do not use, store or leave it in places Precautions for docomo mini UIM card …… P21 with a high temperature such as Precautions for Using near Electronic Medical besides ﬁ...
Page 14 Fire or burns may result. Use the optional accessories speciﬁ ed by NTT DOCOMO for this Make sure to turn oﬀ this terminal terminal. or stop charging before going to the Fire, burns, injury, or electric shock places like a gas station where a may result.
Page 15 If the equipment starts giving oﬀ a If children use a guardian should strange smell, overheats, becomes explain the precautions and correct discolored or deformed during use, operations. Also make sure that the charging or in storage, immediately instructions are followed during use. perform the following operations.
Page 16: Precautions For Terminal
ﬂ ammable materials into the Turn oﬀ this terminal in places near docomo mini UIM card insertion slot high precision electronic devices of this terminal. or devices using weak electronic Fire, burns, injury, or electric shock signals.
Page 17 When the display is accidentally If the display part is accidentally broken, be careful of broken glass broken and liquid crystal leaks out, or exposed internal parts of this do not make the material contact terminal. with your skin of face or hands. Since the plastic panel is used on It leads to blindness or skin problems.
Page 18: Precautions For Battery Pack
Itching, rash or eczema may be Precautions for Battery Pack caused depending on your physical conditions or predisposition. If an ■ Conﬁ rm the battery type from the label of abnormality occurs, stop using this the battery pack. terminal immediately, and then seek Display Battery type medical attention.
Page 19 Blindness may result. may result. Tape the connector to isolate the battery pack and bring it WARNING to a docomo Shop or follow the local disposal regulations. Stop using when transformation or damage is found caused by dropping. Do not use or charge the wet battery Fire, explosion, getting heated or pack.
Page 20: Precautions For Adapter, Usb Cable And Converter Cable For Charging
When battery pack leaks liquid inside, Precautions for Adapter, USB do not touch your skin, such as your Cable and Converter Cable for face or hands. It leads to blindness or skin problems. Charging If such liquid gets into your eyes or mouth, if it adheres to your skin WARNING or clothing, please rinse with clean...
Page 21 Do not touch the adapter, USB Cable, When this terminal is connected with Converter Cable for Charging during an adapter, do not subject excessive thunder. force to any direction. Electric shock may result. Fire, burns, injury, or electric shock may result. Do not make the charging terminal or POWER terminal short out while Do not touch the adapter code (USB...
Page 22 Use the speciﬁ ed fuse when the fuse When removing USB Cable or of DC adapter blows. Converter Cable for Charging, do not Fire, burns, or electric shock may pull the cable with excessive force. result. Refer to the manual for Instead, hold the connector to pull.
Page 23: Precautions For Docomo Mini Uim Card
Fire, burns, or electric shock may result. CAUTION Be careful not to touch the edge of docomo mini UIM card when removing it. Injury may result. Precautions for Using near Electronic Medical Equipment WARNING If you use electronic medical equipment such as an implanted cardiac pacemaker or implanted deﬁ...
Page 24: Material List
Patients using electronic medical Material List equipment other than implanted cardiac pacemakers or implanted ■ L-01G main unit/Back Cover LXX/Battery deﬁ brillators (using outside medical Pack LXX facilities for treatment at home, Part Material/Surface etc.) should check the inﬂ uence of...
Page 25 ■ USB Cable L03 Part Material/Surface Treatment Part Material/Surface Treatment Outer case (battery IR Ink/COPPER CLAD contact surface) side LAMINATE USB-A connector part SPCC-SD/Ni alloy sticker microUSB connector Stainless steel/Ni alloy Outer case (battery part contact surface) Cable Back cover PC/paint Label Art paper/UV coating...
Page 26 ■ Converter Cable for Charging L02 Part Material/Surface Treatment USB-A connector part BRASS/Ni alloy microUSB connector Stainless steel/Ni alloy part Cable Label Art paper/laminate coating Case LUPOY GN1002FH- KPA1/UV coating Contents/Precautions...
Page 27 Be careful when cleaning the connector This terminal, battery pack, adapter, USB Cable contacts. and Converter Cable for Charging docomo mini ■ Do not place the terminal near air UIM card are not waterproof. Do not use them in conditioner outlets.
Page 28 ■ Do not bring strong magnetic objects close in a safe location. to this terminal. DOCOMO assumes no responsibility for the Strong magnetism may cause malfunction. loss of any of your data. ■ Do not drop this terminal or subject it to shocks.
Page 29 Notes about Battery Pack Precautions for Adapter, USB Cable, Converter Cable for ■ Battery pack is a consumable supply. Charging Battery life varies depending on usage conditions, etc., but it is time to change ■ Charge in an environment with the proper battery pack when the usage time has ambient temperature (5℃...
Page 30 ■ Do not drop or give force to the docomo Notes about the docomo mini mini UIM card. UIM card Malfunction may result. ■ Do not bend or put heavy things on the ■ Do not put excessive force on the docomo docomo mini UIM card.
Page 31 - When using near TV, radio, etc., reception : Indicates that assumed interference may occur, or channels on the inducing interference from TV screen may be disturbed. distances is 40 m or less. - If there are multiple wireless LAN access : The full band between 2,400 points nearby and the same channel is MHz and 2,483.5 MHz is...
Page 32 ■ Do not use a modiﬁ ed terminal. Using a change the frequency band or stop use, modiﬁ ed terminal results in violating Radio and contact "docomo Information Center" law/Telecommunications Business Act. on the back cover of this manual for This terminal has been complied with crosstalk avoidance, etc.
Page 33: Before Using This Terminal
Before Using this Terminal Power button: Part Names and Functions Press two seconds or longer to power on/oﬀ . Press shortly to turn on/oﬀ the display. LED indicator: Lighting red: charging this terminal Lighting green: ﬁ nished charging Flashing red: starting charging of mobile device Display (touch panel) External connection terminal: Attach the supplied USB Cable L03, Converter...
Page 34 Antennas are built in this terminal. Wi-Fi main antenna: Antennas are built in this terminal. Back cover: You can see docomo mini UIM card slot after removing the back cover and the battery pack. Note • Communication speed may slow down inﬂ...
Page 35: Using Docomo Mini Uim Card
Insert docomo mini UIM card into the underneath of the docomo mini UIM docomo mini UIM card is an IC card stores a customer's information such as a phone card slot guide in the direction of the number. In this terminal, data communication...
Page 36 Push out 2 to 3 mm of the docomo UIM card. mini UIM card in the direction of • Do not touch the IC of docomo mini UIM card and be careful not to get injured. while pressing the lock by your •...
Page 37 Fail three times in a row to prevent unauthorized use of docomo mini UIM card by a third party. When you have set the PIN1 code for docomo Enter PIN Unlock code mini UIM card, data communication is not Enter it from setting page ( → P103) available without PIN1 code veriﬁ...
Page 38: Attaching/Removing Battery Pack
Shop, bring your identiﬁ cation document (driver's license, etc.), this terminal and docomo mini UIM card to a docomo Shop, or contact "General Inquiries" provided on the back cover of this manual.
Page 39 Align the battery pack with the metal Conﬁ rm the orientation of the back terminals of this terminal and attach cover and align it with the main unit, it in the direction of with " " on press the arrow parts one by one to the battery pack facing up, and insert close the back cover ﬁ...
Page 40 Put your ﬁ nger in the groove of this Removing terminal against the battery pack and press in the direction of a. Lift Note up in the direction of and remove it • Make sure to turn oﬀ this terminal before in the direction of removing the battery pack.
Page 41: Charging
■ Do not charge this terminal for a prolonged Charging time with its power turned on. • If you charge this terminal for a prolonged time ■ Battery Charge with its power turned on, the battery pack will start • Do not apply excessive force when inserting supplying power to this terminal after ﬁ...
Page 42 ■ AC adapter • For details, refer to the instruction manual of AC adapter. • AC adapter can be used from AC 100 V to 240 V. • The shape of AC adapter plug is AC 100 V (Japanese speciﬁ cation). A conversion plug adapter for the destination country is required when using an AC adapter compatible from AC 100 V to 240 V.
Page 43: Charging With Ac Adapter
Charging with AC Adapter It describes how to charge this terminal with AC adapter 04 (optional). Insert it into the external connection terminal of this terminal horizontally with the side of B mark on microUSB connector of AC adapter 04 facing up Insert the power plug of AC adapter 04 into power outlet LED indicator lights up red and the charging...
Page 44: Charging With Pc
When charging is completed, remove Power On/Of the power plug of AC adapter 04 from the power outlet Power On Remove the microUSB connector of AC adapter 04 from this terminal When the power is oﬀ , press the horizontally power button for over two seconds ■...
Page 45 Following onscreen instructions to Note operate • When PIN1 code is failed three times in a row, enter The following settings are required when PIN Unlock code in L-01G Connection Manager. using this terminal following the onscreen (→P103) instructions. • Language •...
Page 46: Viewing Display
Connected network type Viewing Display : LTE network connected : 3G network connected (HSDPA/ The following shows the meaning of each icon HSUPA, W-CDMA) displayed on the screen (press the power : GSM network connected button when it is not displayed ( → P46)). : Connecting via public wireless LAN •...
Page 47 (example screen is shown below). Note • Not like other smart phones, L-01G shows the current time only when it can receive the time information from the Internet. Therefore, for the following cases it may not show the current time correctly.
Page 48: Basic Operations
Operations of touch panel Basic Operations The following operations are available on the touch panel. How to Use Touch Panel • Tap: Touch the screen lightly • Touch and hold: Touch the screen for over one This terminal adopts touch panel which allows second you to operate by touching the panel.
Page 49: Entering A Character
Operate on the touch panel of this terminal to to set settings. For detailed settings, use input characters, etc. L-01G Connection Manager on PC to set up. For details, refer to "Settings" ( → P77). Text box Tap each menu to Tap "...
Page 50 Space key Enter a space. Input switch key Switch number/alphabet input. Input switch key Switch number/symbol input. Tap keyboard area to input characters. The selected characters are input in the text box. • Select character type from alphabet/number/ symbol and tap the character to input. •...
Page 51: Setting Up
Windows 8.1 32bit/64bit ○ Windows 8 32bit/64bit ○ Windows RT is not included. "SYSTEM" of L-01G Connection Manager → Windows 7 SP1 32bit/64bit ○ "Backup & Restore" function cannot be used. Windows Vista SP2 32bit/64bit ○ Windows XP SP3 32bit ○...
Page 52 Using USB Cable Using Wi-Fi Compatible Device You can connect this terminal with a PC via • For Wi-Fi compatible devices which support the supplied USB Cable L03 to use USB IEEE802.11 a/b/g/n (2.4 GHz/5 GHz)/ac, you tethering. can connect it with this terminal and start use. The supported OS information is shown below.
Page 53 Portable" PS Vita Android terminal For operating environment of the latest information, conﬁ rm DOCOMO website. Note • You may not be able to use depending on your environment and device. Note that we are not responsible for any inquiries and operations used in other operating environments.
Page 54: Setup Flow
・Setting on Mac ( → P66) ・For Windows ( → P54) ・Setting on portable device (→P68) ・For Mac ( → P58) Setting in L-01G Connection Manager ・For public wireless LAN setting ( → P84) ・For provider setting ( → P82) Connecting to the Internet...
Page 55: For Wire Connection
Note For Wire Connection • To change the settings of this terminal, connect to a PC and change the settings ﬁ rst before connecting to other Wi-Fi Attaching to/Removing from PC compatible devices. Use the supplied USB Cable L03 to attach to * Also, for terminals support browser, settings of the terminal main unit can be a PC.
Page 56 Attaching cable L03 to the USB port of PC • When connecting for the ﬁ rst time after purchase, setup screen of L-01G driver is displayed automatically via zero installation only for Windows version. Follow the on- screen instructions to install ( → P54) •...
Page 57 • For Windows 8.1, on the desktop screen, the top right  "PC"  "CD Drive (X:) DOCOMO" (X part diﬀ ers depending on the PC). • For Windows 8, on the desktop screen, swipe from the right side of the screen (point the top right of the screen in Click "Run docomo_L01G_...
Page 58 Select "Optimize communication license agreement" and click "Next" settings (W-TCP Setting) (Recommended)" and click "Next" When "Welcome to the InstallShield Wizard for docomo L01G" is Select "Yes, I want to restart my displayed, click "Next" computer now." and click "Finish" Installation starts.
Page 59 Conﬁ rming the Installed L-01G Driver Conﬁ rm if L-01G driver is set in PC. Connect L-01G with a PC via the supplied USB Cable beforehand. Screen displays are taken from Windows 8.1 as example. On the desktop,    "Control Panel"...
Page 60 Click "Continue" Installing Driver (Mac) Screen displays are taken from Mac OS X 10.9.1 as example. (Finder) → "DEVICES" → "DOCOMO" → "NTTDOCOMOINCL01GDRIVERS. pkg" • When you agree on "Software License Agreement", click "Agree". Click "Continue" • When screen related to "reliability of software source"...
Page 61 "Standard Install on "Macintosh HD"" Click "Continue Installation" screen is displayed, and click "Install" Installation starts. Authentication screen is displayed. Click "Restart" on the installation complete screen Enter the Mac name (user name) and password, and click "Install Software" Setting up...
Page 62: For Wireless Connection
For Wireless Connection Setting procedures are diﬀ erent depending on the Wi-Fi compatible device you use. Here it describes setting procedures of each terminal below. • Windows PC (for Windows 8.1) ( → P62) • Windows PC (for Windows 7 or Windows Vista) ( →...
Page 63 ■ SSID/security sticker Note Conﬁ rm the SSID and security key from • For those settings, set them up when the bundled "SSID/security sticker". Also connecting each terminal for the ﬁ rst time. SSID and security key are written on the Once it is set up, auto connection starts sticker inside of the main unit after removing after turning on this terminal.
Page 64 ■ SSID/security sticker Connecting to Windows PC You can use two SSID on this terminal. For default SSID, refer to the bundled "SSID/ The setting procedures described here is security sticker" and the sticker inside the an example when the security mode of this main unit for their meaning.
Page 65 "Network and Sharing Center" window is displayed. Enter the SSID (default setting: "L01G_XXXXXXXX_A" → P61) set Click "Set up a new connection or in this terminal in "Network name" network" Click "Manually connect to a wireless network"  "Next" Select "WPA2-Personal" in "Security type"...
Page 66 Mark "Start this connection Click "Connect to a network" automatically" and click "Next" When "Successfully added L01G_ XXXXXXXX_A" is displayed, click "Close" For Windows 7 and Windows Vista Press the power button of this terminal for over two seconds Click the displayed SSID set in this This terminal is turned on.
Page 67 Enter the security key ( → P61) For Windows XP set in this terminal in "Security key" and click "OK" Press the power button of this terminal for over two seconds This terminal is turned on. When Wi-Fi is OFF, turn it on.
Page 68 Click the displayed SSID set in this Connecting to Mac terminal (default setting: "L01G_ The setting procedures in Mac OS X 10.9.1 XXXXXXXX_A" → P61) and click described here is an example when the security "Connect" mode of this terminal is set to the default setting of "WPA/WPA2-PSK mixed"...
Page 69 Select "Wi-Fi" and click "Turn Wi-Fi Click "Network Name" and select the On" displayed SSID set in this terminal Wi-Fi function on Mac is turned on. (default setting: "L01G_XXXXXXXX_ A" → P61) Note • When "All preferred networks can not be used"...
Page 70 Enter the security key ( → P61) Connecting to iPad set in this terminal in "Password", The setting procedures in iPad described select "Remember this network" and here is an example when the security mode of click "Join" this terminal is set to the default setting of "WPA/WPA2-PSK mixed"...
Page 71: Connecting Android
Connecting Android Connecting to Nintendo DS The setting procedures in Android described The setting procedures in Nintendo DSi here is an example when the security mode of described here is an example when the security this terminal is set to the default setting of mode of this terminal is set to the default "WPA/WPA2-PSK mixed"...
Page 72 Enter the security key ( → P61) set Select "New Connection" and press in this terminal, tap "OK" " ○ " button "OK" Select "Scan" and press the direction Settings are saved. key " △ " button "OK" Select the displayed SSID set in this Connection test starts.
Page 73 Conﬁ rm the connection name displayed Connecting to Wi-Fi Compatible and press the direction key of " " button Device Supports WPS Conﬁ rm the setting list displayed and press the direction key of " " button Note • Setting method is diﬀ erent depending on Press "...
Page 74 ■ Example when "WPS type" is set to "button" Touch and hold WPS of this terminal and release Press the power button of this terminal for over two seconds This terminal is turned on. When Wi-Fi is OFF, turn it on. Turn on Wi-Fi function on the Wi-Fi compatible device being connected and set up WPS function if necessary...
Page 75 Select "PIN(From AP)" in WPS form turn it on. ﬁ eld of WPS setting page on the setting Activate Web browser on the PC page (L-01G Connection Manager) you connected via Wi-Fi function, log in logged in to the setting page of this terminal Click "Create"...
Page 76 Activate Web browser on the PC connected setting page on the setting page by Wi-Fi and display the setting page of this terminal. Change the settings according to (L-01G Connection Manager) you the usage environment of settings on this logged in, click "Start" terminal.
Page 77: Connecting To The Internet
(mopera U, etc.) compatible with service and automatically to enable the usage of the data communication is required. Internet. Conﬁ rm the connection of the For details, visit DOCOMO website. Internet through the Wi-Fi compatible device you use. Connection settings with the Internet service About how to choose an access point when provider is registered in the proﬁ...
Page 78: Connecting To The Internet Using Public Wireless Lan
Connecting to the Internet Using Public Wireless LAN Connect to public wireless LAN such as a station or a cafe to use the Internet. Set up "PWLAN" ( → P84). • When using the public wireless LAN service, a separate subscription or settings are required. Contact the service provider you use for detailed setting information etc.
Page 79: Settings (Web Browser)
Depending on the browser, by Wi-Fi and display the setting page it may not be able to use. (L-01G Connection Manager) of this terminal. • The setting page on this terminal supports You can set up each function.
Page 80 "http://192.168.225.1/" in address input ﬁ eld and press Enter key "Login" screen is displayed. • When L-01G driver is installed on the Windows PC, double click the shortcut of L-01G Connection Manager on the desktop screen and display "Login" screen.
Page 81 ■ When setting PIN1 code Screen of Setting Page PIN1 code conﬁ rmation screen is displayed. Click "Refresh", unlock PIN1 code on this terminal and log in again. Note Top menu Click a menu item and switch to the setting •...
Page 82: Conﬁ Rming Connection State Or Setting State Of This Terminal
"Logout" Conﬁ rming Connection State or Click it when logging out from the setting page. Setting State of this Terminal Setting screen Setting items of the function you selected in menu item are displayed. Click "STATUS" of the top menu "Status"...
Page 83 * When docomo mini UIM card is not inserted, this Frequency band : The frequency band used to item is not displayed. Also, "−" is displayed in (Wi-Fi) access to wireless LAN is "Phone number" ﬁ eld, and "DOCOMO UIM card displayed.
Page 84: Setting Provider
Set up each item in setting screen Setting Provider Proﬁ le name Enter a name of the access point within the following range. Adding Access Point • Up to 15 characters of single byte alphanumeric characters and single byte Register, edit and delete an access point. Up space to 10 access points can be registered.
Page 85 Authentication ■ Delete an access point Select a Authentication for the access point. Select an access point in "Proﬁ le selection" to delete • None Click "Delete" • PAP Click "OK" • CHAP When registering a new access point, click "Save" Click "Apply"...
Page 86: Setting Public Wireless Lan
Setting Public Wireless You can connect to wireless LAN router at home or at work, or connect to the public wireless LAN service outside to access to the Internet. • When using the public wireless LAN service, a Public WLAN separate subscription or settings are required.
Page 87 Searching result ■ When setting WPA/WPA2-PSK Click "Scan" to display the available Password access points in list. Enter a 8 to 64 characters for security • : Connect to an access point. key of WPA/WPA2. • : Disconnect the access point being •...
Page 88: Setting Network
For the following case, the usage amount is communication during international roaming is reset automatically. not displayed. • First of each month 0 o'clock • When replacing docomo mini UIM card Click "MOBILE NETWORK" on the top • When unlocking SIM menu Display mode •...
Page 89: Advanced Settings Of Wireless Lan
Maximum data size Advanced Settings of Select "Used data with max data" in "Display mode" to input. Wireless LAN Enter valid value * Valid value: positive integer of 1 to 99 Note Invalid value: numbers other than minus, 0, decimal point and valid value •...
Page 90 Privacy separator Set if communication between clients connected to diﬀ erent SSID is available. When Privacy separator is set to valid, communication between wire connected network device and Wi-Fi compatible devices connected to diﬀ erent SSID is not available. • On •...
Page 91 IEEE802.11 Mode IEEE802.11 Mode Select an operation mode of wireless LAN. Select an operation mode of wireless LAN. • 11b only • 11a only • 11b/g • 11n only • 11g only • 11ac only • 11n only • 11a/n •...
Page 92 Security Setting Security Mode of Setting security mode of wireless LAN. Wireless LAN • Open • WEP • WPA-PSK Click "Wi-Fi" of the top menu • WPA2-PSK Click "SSID setting " of the sub menu • WPA/WPA2-PSK mixed The setting items are diﬀ erent depending on Set each item of primary SSID in the settings of security mode.
Page 93 Password ■ When setting to WPA/WPA2-PSK mixed Enter a 8 to 64 characters for security Encryption type key of WPA. Select an Encryption type. • For key of 8 to 63 characters, single • TKIP/AES byte alphanumeric characters (0 to 9, •...
Page 94 Secondary SSID Set up each item in setting screen When using secondary SSID, set "Secondary SSID" to "On". Click "Apply" to save the settings Setting Secondary SSID Use secondary SSID function to connect the Wi-Fi compatible devices with diﬀ erent security modes at the same time.
Page 95 Click "Apply" to save the settings Set up each item in setting screen Setting WPS Function Note • In "Security" ( → P90), when it is set to the following settings, WPS function cannot be used. - WEP - WPA-PSK - WPA2-PSK (TKIP) Select whether to use WPS function.
Page 96 Click "Apply" to save the settings ■ When allowing or rejecting Input ﬁ eld of MAC address is displayed. Click "Apply" button to maintain the saved Enter the speciﬁ ed MAC address of this WPS type even when this terminal is restarted. terminal.
Page 97 To disconnect, click in the Setting DHCP Function "Disconnect" ﬁ eld • Each client is displayed as MAC address. Click "Wi-Fi" of the top menu Make sure the client you want to disconnect. • : Save to permission list of MAC Click "DHCP"...
Page 98 DHCP server Add static DHCP Select whether to use DHCP function. Add static IP address. When registering • On the terminal connected to this terminal, • Oﬀ click and enter the MAC address, IP Primary DNS address in item ﬁ eld. Click "Register" Set IP address of Primary DNS server.
Page 99: Setting Router
Firewall Setting Router Set valid or not. • On: Set Firewall to valid. • Oﬀ : Set Firewall to invalid. Using Firewall ■ When using Click and register IP address. Use Firewall function to prevent unauthorized Internet IP address access to the Internet. Also you can set IP Enter the IP address of the Internet side.
Page 100 Protocol number Abandon Ping from WAN Side In Protocol setting, when "TCP", "UDP" or "Manual" is selected, select or enter port It prevents IP information leak of both this number. Port number can be entered from terminal and the terminal of LAN side by 1 to 65535.
Page 101 Setting IDENT Setting DMZ Send reject packet to the authentication One of the devices connected to network on request of IDENT from the Internet. this terminal can be set to DMZ. The packet sent from the Internet side to the Click "ROUTER"...
Page 102 ■ When setting Setting Port Maping Click "Add". Forward the connection request from "From" Set to allow (port convert) about the automatically to the certain terminal (IP communication starts from the Internet. address and port number) of "To". Click "ROUTER" of the top menu From •...
Page 103 VPN connection Setting UPnP Function This terminal provides VPN pass-through When using application, etc. which uses UPnP function. function, set UPnP function to "On". VPN pass-through function allows the client Click "ROUTER" of the top menu connected to this terminal supports connection via external VPN.
Page 104: Managing System
When changing lock valid/invalid (PIN1 code input valid/invalid), enter the PIN1 code of Set up this function to lock network docomo mini UIM card. communication and the password (PIN1 code) Remaining times is required to enter when powering on this The number of available input times of PIN1 terminal.
Page 105: Changing Password
"Conﬁ rm new PIN1 code" ﬁ eld to conﬁ rm Click "Apply" to save the settings Current PIN1 code Enter the PIN1 code set in docomo mini UIM card. New PIN1 code Enter a new PIN1 code. Settings (Web browser)
Page 106: Changing Login Password
Conﬁ rm PIN1 code Changing Login password Enter the same PIN1 code as you entered in "New PIN1 code" to conﬁ rm. The login password of the setting page can Remaining times be changed. Set password using 4 to 32-digit The number of available input times of PIN1 single byte alphanumeric characters and code is displayed.
Page 107 Click "Apply" Backup to ﬁ le Click "Backup" and specify a ﬁ le name "Incorrect password entered" is displayed. ("L01G_webcm_conﬁ g.cfg" as default), save Click "OK" the current settings. * Depending on the browser you use, ﬁ le name may not be able to specify. Backing up/Restoring the Restore from ﬁ...
Page 108 Initializing the Settings Conﬁ rming Version Information All the settings of the setting page can Click "SYSTEM" of the top menu be initialized to the status at the time of purchase. However, data communication Click "Version" of the sub menu amount displayed on the display is not reset.
Page 109 • 50% • 35% • 15% Click "Apply" to save the settings Log out from the L-01G Connection Manager. Note Auto oﬀ timer(min) • Auto oﬀ timer function is valid during Set if turn oﬀ Wi-Fi function and turn on charging.
Page 110: Settings (Setting Menu On This Terminal)
Settings (setting menu on this terminal) "Add" Setting on the Display of this Terminal (Setting Menu) For details about the operations of setting menu, refer to "Menu Operations on this Terminal" ( → P47). Provider Settings From the Home screen, " "...
Page 111 Wi-Fi Note Set if set Wi-Fi to valid or not. • The registered proﬁ le name cannot be changed. Frequency band ( → P88) When changing proﬁ le name, delete the Primary SSID proﬁ le and register again. Edit the information of the Primary SSID you set up.
Page 112: Display Settings
Estimates of network data usage can be From the Home screen, " " displayed. Display the setting menu. You can also make settings by L-01G Connection Manager. ( → P86) "Display" From the Home screen, " " Display the setting menu. "Mobile Network"...
Page 113 If tapped, connectable networks are searched for, and displayed You can also search networks with in the network operator screen. L-01G Connection Manager. ( → P120) ■ When selecting manually • This function is not available if connected to a The network operator screen is displayed.
Page 114 • Used networks: Displays all the access The same setting can be operated in points. Notiﬁ cation L-01G Connection Manager. ( → P84) When an non-encrypted access point which From the Home screen, " " is not in connection history is detected, set Display the setting menu.
Page 115 (Check mark): Connected access points selected. In this case, make the setting on • : Security conﬁ gured access points L-01G Connection Manager. ( → P84) • Public wireless LAN receiving level Kana and kanji are not correctly displayed. Strong Weak They are replaced with “_ (under bar)”...
Page 116: System Setting
Wi-Fi Power control • If access points are not immediately Change settings for Auto oﬀ timer. connected to even if you are in a service area ( → P107) where the public wireless LAN is switched USB tethering "ON", from the Home screen, switch OFF/ Switch USB tethering function to ON/OFF.
Page 117 Note • The PCs that are connected via USB Phone number tethering cannot be counted in the The phone number of docomo mini UIM card connection count (up to 10) to this terminal. is displayed. *1, *2 SSID & Password SSID and password (security key) are displayed.
Page 118 Security key is only displayed when "SSID/ displayed in the Home screen. Key Display on modem" is set to "On" Shortcut setting (→P88) in L-01G Connection Manager. Explanations about shortcuts can be Secondary SSID is only displayed displayed at the bottom of the Home screen.
Page 119: Overseas Use
■ Before using this terminal overseas, check out the following items. - "Mobile Phone User's Guide [International Services]" - DOCOMO "International Services website" ■ Since overseas is outside of Xi area, please use a 3G network or GSM/GPRS network. Overseas Use...
Page 120: Conﬁ Rming Before Using
For details, refer • For users of mopera U, refer to the mopera U to "Mobile Phone User's Guide [International website. http://www.mopera.net/ (in Japanese Services]" or DOCOMO "International service only) website". Overseas Use...
Page 121 • You can check the connected network operator name on notiﬁ cation panel. ■ Inquiries • If this terminal or docomo mini UIM card is lost or stolen overseas, contact DOCOMO immediately from your current location and carry out the procedures to suspend usage.
Page 122: Settings For Using Overseas
Log in to the setting page Select if you want to specify an access point For details, refer to "Logging in to the or not. Setting Page (L-01G Connection Manager)" • Auto: The connectable network is selected ( → P77). automatically.
Page 123 Log in to the setting page Note For details, refer to "Logging in to the • Using overseas Setting Page (L-01G Connection Manager)" - Some services are not able to use ( → P77). depending on the overseas operator or the Click "MOBILE NETWORK"...
Page 124: Charging Mobile Device
Charging Mobile Device connection terminal of this terminal Charging Mobile Device with the USB mark facing up Insert the USB connector of the Attaching supplied USB cable L03 into the USB connector of the supplied Converter Cable for Charging L02 with the USB mark facing up Conﬁ...
Page 125 Select charging mode on the display • 40% • 20% of this terminal and tap "OK" • 0% (Only displayed when "Charging Only" Charging of the mobile device starts. is selected) is displayed and the LED indicator is Note ﬂ ashing red for ﬁ ve seconds. •...
Page 126 Removing Remove USB cable L03 from the mobile device and Converter Cable for Charging L02 Remove Converter Cable for Charging L02 from this terminal Charging Mobile Devices...
Page 127: Appendix/Troubleshooting
Appendix/Troubleshooting Menu item/ Setting L-01G Connection Manager Default value setting item range menu item setting item list Access point mopera.net Up to 99 name characters of Menu item/ Setting single byte Default value alphanumeric setting item range characters and Provider single byte Proﬁ...
Page 128 Menu item/ Setting Menu item/ Setting Default value Default value setting item range setting item range Password (None) Up to 32 Add new WLAN access point characters of AP name (None) Up to 32 single byte characters of alphanumeric single byte characters and alphanumeric single byte...
Page 129 Menu item/ Setting Menu item/ Setting Default value Default value setting item range setting item range Network data usage IEEE802.11 11b/g/n 11b only, 11b/ Mode g, 11g only, Current Used data only Used data 11n only, 11b/ data only, Used usage data with max data, Oﬀ...
Page 130 Menu item/ Setting Menu item/ Setting Default value Default value setting item range setting item range SSID setting SSID Oﬀ On, Oﬀ Stealth Primary SSID Secondary SSID SSID L01G_ Up to 32 XXXXXXXX_A characters of Secondary Oﬀ On, Oﬀ single byte SSID alphanumeric Wi-Fi Protected Setup (WPS)
Page 131 Menu item/ Setting Menu item/ Setting Default value Default value setting item range setting item range DHCP On, Oﬀ Add static (None) (MAC address, server DHCP values from Start IP Start IP 192.168.225.20 From ﬁ rst to address to End address third octet IP IP address)
Page 132 Menu item/ Setting Menu item/ Setting Default value Default value setting item range setting item range Port mapping Modify Port Oﬀ On, Oﬀ Current (None) Single byte mapping PIN1 numbers of code 4 digits to 8 From digits Port TCP, UDP New PIN1 (None) Single byte...
Page 133 Menu item/ Setting Menu item/ Setting Default value Default value setting item range setting item range (None) Up to 4 to 32 AP operation mode password characters of Router Router, Bridge single byte operation alphanumeric mode characters and symbols (~！ @#$%^&*-_:、...
Page 134: Introduction Of Options And Related Devices
Some products may not be able to purchase in some certain areas. For details, contact a service counter such as a docomo Shop. For details about options, refer to the related instruction manuals. • Back cover LXX •...
Page 135: Troubleshooting
"Repairs" (in Japanese ( → P44, P41, P53) only) on the back cover of this manual or a Cannot Conﬁ rm the following things. repair counter speciﬁ ed by DOCOMO. charge • Is battery pack inserted correctly? ( → P33) indicator •...
Page 136 Depending on the mobile device, it may not be able to charge fully. For Charging Is the speciﬁ ed cable used? details, visit DOCOMO website. time of ( → P122) the mobile Is the mobile device powered on?
Page 137 ■ Terminal operations related Symptom Check item Symptom Check item Battery life Conﬁ rm the following things. is short ( → P39) Becomes It is normal that the adapter • Has this terminal been out of the hot during becomes warm during operating or network service area for a long operating charging.
Page 138 Symptom Check item Symptom Check item docomo Is docomo mini UIM card inserted in This L-01G Uninstall the driver and mini UIM the right direction? ( → P33) terminal connect again. card is not is not ■ How to uninstall driver...
Page 139 Conﬁ rm if the correct security key is connect displayed. device set in the Wi-Fi compatible device. via USB Select "docomo L01G" and ( → P60) Cable L03 click "Uninstall" When you forget the security key Click "Yes" set in this terminal, refer to "Setting Make sure that "Clear...
Page 140 Symptom Check item Symptom Check item Cannot When this terminal is set to a Cannot ■ Example when security mode is WEP (for Mac OS X 10.9.1) connect security mode other than WPA/ connect "Apple" menu → "System to Wi-Fi WPA2-PSK mixed, the same setting to Wi-Fi Preferences"...
Page 141 GPRS located in unsteady areas, Power on again, or insert the battery slow speed becomes slow. Move to pack or docomo mini UIM card again. immediately another place and connect again. Depending on the type of radio When communicating on Windows...
Page 142 Symptom Check item indicates out- [International Services]" or DOCOMO of-service "International Services website" to Stop Is docomo mini UIM card inserted area appears) check whether a service area or operating correctly into this terminal? network operator is available. all of ( →...
Page 143: Error Message
L-01G is locked If you fail entering the because user correct PIN unlock code ten failed to input times, the docomo mini UIM Message Displayed in Setting correct PIN unlock card will be locked. Contact Page (L-01G Connection Manager) code for 10 times.
Page 144 When "Security" is set to because user correct PIN unlock code ten "WEP" and "SSID Stealth" is failed to input times, the docomo mini UIM set to "On", WPS function correct PIN unlock card will be locked. Contact cannot be used. ( → P91) code for 10 times.
Page 145: Warranty And After-Sales Service
Repairs Warranty and After-Sales Service Bring your terminal to a repair counter speciﬁ ed by DOCOMO. Repairs are accepted during business hours of a repair counter. Also, you must bring the warranty. Note that Warranty it may take some days to repair this terminal depending on the malfunction state.
Page 146 DOCOMO- However, repairs may be refused depending on speciﬁ ed repair oﬃ ce as soon as possible.
Page 147: Updating Software
- While communicating There are two methods of checking the software update as shown below. - When docomo mini UIM card is not inserted - When "out of service" is displayed • When there is a latest update, "New software version is available.
Page 148 • During software update, data charge may occur "Software update" depending on the charge plan you registered. "Check now for update" • During a software update, your L-01G Software update screen is displayed. information (model and manufacturing numbers) are automatically sent to a software update server managed by DOCOMO.
Page 149 When a message appears to show Setting Download Method there is a update notiﬁ cation, "Update" From the Home screen, " " "OK" Software download starts and software is "Software update" updated. This terminal restarts once or twice "Download setting" during installation.
Page 150: Resetting This Terminal
Main Speciﬁ cations Follow the operations below to reset this ■ Terminal terminal to the default settings. However, Model name L-01G data communication amount displayed on the display is not reset. Size (H×W×D) Approx. 97 mm × Approx. For details about resetting data 62 mm ×...
Page 151 Charging time AC adapter 03: approx. 300 Wireless IEEE max. transmission speed minutes 802.11a (standard) 54 Mbps AC adapter 04: approx. 210 compatible IEEE 2.4 GHz, max. transmission minutes standard 802.11b speed (standard) 11 Mbps DC adapter 03: approx. 360 IEEE 2.4 GHz, max.
Page 152 50/37.5/25/12.5 Mbps. Nominal 3,600 mAh For details about Xi compatible areas, please capacity visit DOCOMO website. Only a part of Xi areas. ■ JATE validation key • Continuous communication time is an estimate D13-0330001 of the battery life in case of a continuous call with normal signal reception.
Page 153 Speciﬁ c Absorption Rate Regulations (SAR) of Mobile Terminals Japan Export Control Regulations ("Foreign This model L-01G complies with Japanese Exchange and Foreign Trade Law" and technical regulations and international relevant laws and regulations) may apply to guidelines regarding exposure to radio waves.
Page 154 (in Japanese only) the lower the power output of the device. During communication, please keep the NTT DOCOMO, INC. Website: terminal farther than 1.5 cm away from your https://www.nttdocomo.co.jp/english/ body without including any metals. This product/sar/ terminal satisﬁ...
Page 155 Declaration of Conformity public is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue, recommended by The product "L-01G" is declared to conform The Council of the European Union. The limit with the essential requirements of European incorporates a substantial margin of safety to...
Page 156 European Union Directives Important Safety Conformance Statement Information Hereby, LG Electronics Inc. AIRCRAFT declares that this product Switch oﬀ your wireless device when boarding is in compliance with: an aircraft or whenever you are instructed to • The essential do so by airline staﬀ . Power oﬀ your wireless requirements and other device when boarding an aircraft or whenever relevant provisions of...
Page 157 INTERFERENCE FCC Regulations Care must be taken when using the wireless router in close proximity to personal medical devices, such as pacemakers and hearing aids. Part 15.105 statement Pacemakers This equipment has been tested and found Pacemaker manufacturers recommend that a to comply with the limits for a class B digital minimum separation of 15 cm be maintained device, pursuant to Part 15 of the FCC...
Page 158 • Consult the dealer or an experienced radio/TV THIS DEVICE MEETS THE GOVERNMENT'S technician for help. REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Change or Modiﬁ cations that are not expressly Your wireless device is a radio transmitter approved by the manufacturer could void the and receiver.
Page 159 • "FOMA", "mopera U", "WORLD WING", "Xi" SAR levels evaluated as in compliance and "Xi" logo are trademarks or registered with the FCC RF emission guidelines. SAR trademarks of NTT DOCOMO, INC. information on this device is on ﬁ le with the ® ®...
Page 160 Apple Inc. of US and other countries. makers to be used. • Adobe and Adobe Reader are either registered • Unlocking SIM is available at a docomo Shop. trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other •...
Page 161 Battery pack ……………………………………… 36 DHCP ……………………………………………… 97 Attaching ……………………………………… 36 Display ………………………………………… 31, 44 Removing ……………………………………… 38 docomo mini UIM card ………………………… 33 Attaching ……………………………………… 33 Changing password ………………………… 105 Changing Login Password …………………… 106 Removing ……………………………………… 34 Charging …………………………………………… 39 Charging mobile device………………………...
Page 162: Main Speciﬁ Cations
Error message …………………………………… 149 MAC address ﬁ lter ……………………………… 96 European Union Directives Conformance Main Speciﬁ cations …………………………… 157 Statement ………………………………………… 162 Material List ……………………………………… 22 Export Administration Regulations ………… 160 External connection terminal ………………… 31 Overseas use Available Services …………………………… 125 FCC Regulations …………………………………...
Page 163 Reset UPnP ………………………………………………… 103 Resetting this Terminal …………………… 156 USB Cable L03 ………………………………… 53 Attaching ……………………………………… 54 Removing ……………………………………… 54 Security Code …………………………………… 35 PIN1 code ……………………………………… 35 PIN Unlock code ……………………………… 35 Version Information …………………………… 108 Setting Network ………………………………… 88 Adding Access Point …………………………...
Page 164 Japanese only) on a PC ※ When using a PC, you need your "docomo ID/password" to access this page. ※ If you do not have or you have forgotten your "docomo ID/password", contact "General Inquiries" on the back of this manual.
Page 165 Business hours: 9:00 a.m. to 8:00 p.m. (open all year round) ● Please conﬁrm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website. NTT DOCOMO website http://www.nttdocomo.co.jp/english/...

Docomo L-01G Instruction Manual

Table of Contents

Danger

Quick Links

Chapters

Troubleshooting

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Docomo L-01G

Summary of Contents for Docomo L-01G

Table of Contents