Sony TRINITRON KV-30HS510 Service Manual page 162

Item
S VIDEO
1
VIDEO 2 INPUT
VIDEO/L(MONO)-AUDIO-R
2
VIDEO 2 INPUT
MEMORY STICK
3
MEMORY STICK LED
4
5 TV/VIDEO
6 -VOLUME +
7 -CHANNEL+
8 TIMER LED
9 STAND BY LED
0 Infrared Receiver (IR)
qa POWER
Description
Connects to the S VIDEO OUT jack on your camcorder or other video
equipment that has S VIDEO. Provides better picture quality than composite
video (2).
Connects to the composite A/V output jacks on your camcorder or other
video equipment.
Memory Stick insertion slot. For details, see "Using the Memory Stick Picture
Viewer" on page 54.
When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
Press repeatedly to cycle through the video equipment connected to the TV's
video inputs.
Press to adjust the volume.
Press to scan through channels. To scan quickly through channels, press and
hold down either CHANNEL
When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off. For details, see page 79.
Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
"Contacting Sony" on page 84).
Receives IR signals from the TV's remote control.
Press to turn on and off the TV.
button.
11