Advertisement
Setup and Use
IMPORTANT! Test sound reception of this monitor before first time use and
whenever you change location of transmitter (see page X).
1
Set transmitter channel switch to same channel as receiver.
2
Place transmitter in same room with child. Point microphone directly toward
crib or play area.
3
Unwrap and fully extend AC adaptor cord for best transmission.
Insert AC adaptor jack into transmitter socket and plug into wall outlet.
4
Slide transmitter on/off switch to turn power on. Power indicator lights.
5
Place receiver where you will see or hear it.
6
Unwrap and fully extend AC adaptor cord for best reception. Insert AC adaptor
jack into receiver socket and plug into wall outlet.
Note: To use a 9V alkaline battery for power source, refer to "Receiver Battery
Installation" instructions on this page.
Rotate receiver on/off/volume dial to turn power on. Power indicator lights.
7
Rotate on/off/volume dial to adjust volume
.
9
Advertisement
