Cleaning The Cold Water Inlet Filter; Cleaning The Air Intake Filter - Vesta VRC-80 User Manual

Cleaning the Cold Water Inlet Filter

To clean the cold water inlet filter:
1
Drain the boiler. Refer to "Draining the Boiler" on page 11.
2
Remove the cold water inlet filter from the boiler.
3
Rinse the cold water inlet filter with clean running water.
4
Reinsert the cold water inlet filter.
5
Refill the boiler. Refer to "Draining the Boiler" on page 11.
12
User Manual

Cleaning the Air Intake Filter

To maintain the boiler properly, clean the air intake filter every 2–3
months. If the air intake filter is clogged by dust or lint, the boiler
will cease to operate or error can occur.
To clean the air intake flter:
1
Press the button to turn off the boiler.
2
Disconnect the power supply to the boiler.
3
Remove the boiler front cover by loosening the 2 Phillips
screws securing it to the case.
1
4
Remove the air intake filter located under the air intake
connector.
5
Rinse the air intake filter with clean running water.
6
Dry the air intake filter completely.
7
Reinsert the air intake filter.
8
Replace the front cover.
2
2
1
Air intake filter