Table of Contents
Advertisement
Step 12. Please tear the double-sided tape and paste on the back of Cloud Door & Window
Sensor (DDLA0z). Then paste the DDLA0z one part on the frame of Window, and the other
part on the Window. The interval of both parts is no longer than 1 cm. (You can also fasten
the DDLA0z by the attached fasteners.) Turn on the power. When the ZigBee light is
blinking, which means the DDLA0z is mapping with Home Gateway(ZGA201). Once the
Window is opened, the alarm will start to have the alert sound.
Step 13. Please open the lid of the Cloud Motion Sensor (MDKA0z) and insert 2 x AAA
batteries. Before close the lid, switch the power to ON
Step 14. After fastening the MDKA0z on the hallway or gate, it will trigger the
Alarm(ZAL211)if someone approaches the MDKA0z. When the left light (ZigBee) of
MDKA0z is blinking, means the MDKA0z is connecting properly with Home
Gateway(ZGA201).
18
Advertisement
Table of Contents
