Table of Contents
Advertisement
1.3
Hardware Installation
Set up the antennas of both Home Gateway (ZGA201) and IP Cam (IPJC2n), then power
on the Smart Switch (WSG70n), Security Alarm (ZAL211), and install batteries of the
Door and Window Sensor (DDLA0z), start up the Motion Sensor (MDKA0z). To use the
security system, you have to download Sapido APP first. Please follow the steps below:
Step 1. Install both Antenna on Home
Gateway (ZGA201).
Step 3. Press the white button to start up.
Home Gateway(ZGA201) is the main router of your SH206+, which with two different
Antennas (one is supported 9dbi, the other one is supported 7dbi)to remain the quality of
WiFi transmission function.
Step 2. Connect the Ethernet cable to ZGA201
WAN port.
Step 4. Wait for 30 seconds and both (
(
) turn on means start up
successfully.
14
)/
Advertisement
Table of Contents
