Philips GC2225 Service Manual page 2

DISASSEMBLY ADVICE
BACKPLATE 1
BALL SWIVEL 2
SWIVEL PLATFORM 20
CORDSET 3
Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
OPERATION KNOB 4
DOSING UNIT 5
INLAY 6
FILLING DOOR 19
PUMP 8
NOZZLE 9
Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
Remove Cord set 3
Remove Dosing unit 5
Remove Screw D 1x
Remove Inlay 6
Remove Operation knob 4
REPAIR INSTRUCTIONS
- Due to the high voltage of the iron, ONLY the specified cordsets must be used.
- Thermostat that is fitted to the soleplate (Pos 16) was pre-adjusted by the suppliers and secured by glue.
To avoid mal-function of the iron, NEVER re-adjust the thermostat.
- No information about the type number and voltage is stamped onto the typeplate. When replacing the cover (typeplate is at the
bottom), engrave at least the type number & voltage on the typeplate with a sharp object.
- Part number 107, 108 cannot be ordered separately.
OPTIONAL (accessories)
- No specific issues
DIAL 10
RATTLE SPRING 11
TANK SET 12
TANK SEAL 106
ASO MODULE 13
Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
Remove Cord set 3
Remove Dosing unit 5
Remove Screw D 1x
Remove Inlay 6
Remove Operation knob 4
Remove Screw C 3x
GC2225
COVER 14
THERMOSTAT BUSH 15
SOLEPLATE 16
SEAL 102, 103
Remove Screw A 1x
Remove Backplate 1
Remove Screw B 2x (cord clamp)
Remove Cord set 3
Remove Dosing unit 5
Remove Screw D 1x
Remove Inlay 6
Remove Operation knob 4
Remove Screw C 3x
Remove Tank set 12
Remove Screw E 3x
Remove Cover 14
2-4