Axle And Wheel Nuts; Wheel Hub Tightening - Polaris Outlaw 9921811 Owner's Manual

Maintenance
Wheel Installation
1. Lock the parking brake.
2. Place the wheel in the correct position on the wheel hub. Be sure the valve stem is
toward the outside and rotation arrows on the tire point toward forward rotation.
3. Install the wheel bolts and finger tighten them.
4. Lower the vehicle to the ground.
5. Securely tighten the bolts to 22 ft. lbs. (30 Nm).

Axle and Wheel Nuts

All nuts with a cotter pin installed must be service by an authorized Polaris dealer.

Wheel Hub Tightening

Front wheel bearing tightness and spindle nut retention are critical component operations.
All service must be performed by your authorized Polaris dealer.
141