Table of Contents
Advertisement
INSTALLATION FOR VEHICLE USE
1. LSMD-121 INSTALLATION
WARNING:
UNDER NO CONDITION SHOULD THE LCD DISPLAY BE MOUNTED IN ANY POSITION
WHERE A PICTURE MIGHT BE VISIBLE TO THE DRIVER. EVEN IN THOSE CASES WHERE
SUCH AN INSTALLATION IS NOT PROHIBITED BY LAW, DONG SO MIGHT INCREASE THE
LIKELIHOOD OF A SERIOUS ACCIDENT
EXAMPLE
NOTES:
DO NOT SECURE THE LSMD-104 DIRECTLY TO THE ROOF HEADLINER MATERIAL. THE
HEADLINER MATERIAL AND BACKING WILL NOT BE STRONG ENOUGH TO SAFELY
SUPPORT THE UNIT'S WEIGHT.
The DC Power plug should not be accessible to the consumer.
When mounting the LSMD-121 with screws,
be certain that the minimum thickness of the
mounting material is as follows:
Wood :
3/8" or more
Metal :
1/8" or more
Plastic :
3/16" or more
2. LSMD-121 CUTOUT DIMENSIONS
Please use the cutout template that is packaged
with this unit.
Install the unit to metal pillars in the vehicle's roof with 4
screws. If the pillars are not conveniently located, secure a
3/8" plywood board to the pillars and mount the LSMD-121
to the plywood board.
Use extreme care to insure that tools do not
damage the unit.
Use extreme care to insure that cutting tools
and/or mounting screws do not contact, cut or drill
through exterior body panels.
16
380
324
Advertisement
Table of Contents
