Zone Effects Amount; Enabling / Disabling; Controllers Per Zone - Casio PX-5S Quick Start Manual

ZONE EFFECTS AMOUNT

effects amount for each zone
Each Zone can use more or less of the main effects (Chorus, Delay and Reverb).
• Select Mixer Edit. Press 8/> until you get to Page 5/6.
• You'll see Chorus Send and below it Delay Send. Reverb Send is found on the last page of parameters (Page 6/6).
Adjust the send amount for each Zone (use the +/- Zone/Part/Step/Track buttons) for each of these three System
Effects.

ENABLING / DISABLING

CONTROLLERS PER ZONE

You may want only one side of a split to respond to the sustain pedal, Pitch Bend, or one of the knobs/sliders.
• Press Exit to move back out of Mixer Edit, and press
then 6/v once to move to Controller Edit. Press Enter.
• Press 6/v∨ (or use Knob 1!) to scroll through the
various controllers. Press Enter to select the one
you want.
• It can be set to Enable or Disable per Zone. Use the
-/No and +/Yes buttons to the far right of the panel
(or Knob 2!) to set it, and then use the +/- Zone/
Part/Step/Track buttons to choose the other Zone
to set as desired.
• Press Exit and then scroll to other controllers to set
as needed.
16