Manual Program Operation - KRain Pro EX 2.0 Installation And Operation Manual

MANUAL PROGRAM OPERATION

When a full program operation is needed
the user can manually start any of the three
(A, B or C) programs.
1. Use the PROGRAM SELECT BUTTON to
select the program (A, B or C) you wish
to manually operate.
2. Turn the dial to AUTO or RUN PROGRAM.
3. Press MANUAL START / NEXT button to
start the selected program.
4. The display will show "RUN," the station
currently running and the remaining
run time for that station. As each station
completes its previously programmed
run time the next station in sequence
will begin watering.
5. Manual operation can be cancelled anytime
by turning the dial to OFF for 3 seconds.
6. Return the dial to AUTO.
NOTE: Pressing the BACK or NEXT buttons
will manually advance to the next or previous
station number.
Previously programmed run times can be
increased or decreased during manual
operation. Any run time changes during
manual operation WILL NOT change the
station's stored program run time.
FRI 9:09
A
PGM
starT
A
PGM
Installation, Programming and Operation Manual
REMOTE PIN
The Pro EX 2.0 has an optional
Handheld Remote (not included)
for convenient controller operation
eliminating back and forth trips to
the controller.
NOTE: To use this feature the
controller must be connected to
AC power and the optional Remote
RF Module must be installed.
AM
For RF Module installation, Pin Code
programming and operation please
refer to the optional Pro EX 2.0 remote
user manual.
08