Powering Up/Down The Remote - KRain Pro EX 2.0 Owner's Manual And Installation Instructions

POWERING UP REMOTE
Turn on the Remote by touching and holding
any button for two seconds. While the remote
powers up, it will automatically attempt to
match pin codes with any and all controllers
within signal range.
NOTES:
1.) The default pin code is 1111.
Any and all controllers within signal
range with matching pin codes will
accept remote commands.
2.) After installation we recommend
changing your code to avoid interference
with other like controllers in the area.
See page 8.
www krain com
07
POWERING DOWN REMOTE
The Remote has an auto shut off feature which
helps extend the life of the batteries. The auto
shut off or power saving feature will automatically
power down the remote after one minute from the
last touch of any button.