Cleaning And Preservation - Polaris 600 IQ Widetrak Owner's Manual

Matte Clear Coat Cleaning (if equipped)
Matte finish products are prone to trapping dirt, oils and other contami-
nants. Polaris Industries recommends cleaning with warm water and a
mild dish detergent. Use a soft sponge to gently rub the surface and rinse
with clean warm water. For stubborn stains such as grease or oil use a
citrus based cleaner (3M Citrus Base Cleaner recommended). Spray
onto the area to be cleaned and rub with a soft sponge. Allow to sit for a
couple of minutes and wash away with clean warm water. Repeat as
necessary to clean the surface.
NOTICE: Never use a polishing/buffing wax or any sponge that has an abrasive
surface. These products will buff the matte surface of the finish
resulting in a glossy finish. It is not recommended that you clean matte
finishes with a pressure washer as this will further imbed
contaminants into the clear coat and possibly damage the decals.
Extended Storage
Off-season or extended storage of your snowmobile requires preventive
measures to aid against deterioration and to prolong the useful life of
many components. See page 116 for the part numbers of Polaris prod-
ucts.

Cleaning and Preservation

Proper storage starts with cleaning, washing, and waxing the hood,
chassis, and plastic parts. Wipe down remaining surfaces with a damp
cloth. Clean and touch up with paint any rusted or previously painted
surfaces. Be sure that corrosive salt and acids are removed from surfaces
before beginning preservation with waxes and rust inhibitors (grease, oil
or paint).
The snowmobile should be stored in a dry garage or shed, out of direct
sunlight, and covered with a fabric snowmobile cover. Plastic tarp may
cause condensation to form and damage snowmobile components.
MAINTENANCE
113