Intel H110 Express Technical Manual page 46

► PEG Port Configuration
Press [Enter] to make settings for the following sub-items:
PEG Port Configuration
PEG(PCIE1 Slot)
This will show current device connected to PCIE1 slot.
Max Link Speed
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
► Memory Configuration
Press [Enter] to view brief information for the working memory module.
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
USB Controller
The optional settings are: [Disabled]; [Enabled].
HD Audio
The optional settings are: [Disabled]; [Enabled]; [Auto].
Onboard Lan1 Controller/ Onboard Lan2 Controller
Use this item to enable or disable LAN1/LAN2 device or controller.
MPE Slot
Use this item to enable or disable the Mini-PCIE root port.
The optional settings are: [Disabled]; [Enabled].
Speed
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure (G3 state).
The optional settings are: [Always Off]; [Always On]; [Former State].
41