Configuration And Setup - Broadcom ThingWorx BCM943364WCD1 C-SDK Setup Manual

Broadcom BCM943364WCD1 C-SDK Setup Guide (v 1.0)
6. Next, change directory to the demo folder in your
extracted file as in: WICED-SDK-3.5.x/apps/demo
and create a folder named 'thingworx'.
7. Download the ThingWorx C-SDK from the PTC
support site (downloads section) at
support.ptc.com.
8. Open the Thingworx C-SDK and copy the "src"
folder to WICED-SDK-3.5.x/apps/demo/thingworx.
Configuration and Setup
1. Extract the Broadcom zip file packaged with
this Starter Kit onto your Linux OS.
Copy the 'thingworx.c', 'thingworx.mk', and
2.
'wifi_config_dct.h' files to the WICED-SDK-
3.5.x/apps/demo/thingworx directory, created
earlier.
mkdir thingworx
5