Advertisement
SPEEDOMETER KIT INSTALLATION INSTRUCTIONS
- Remove plenum.
- Drill 4.5² hole in instrument housing 5.9² from the
tachometer center to the center of the new hole.
5.9²
- Relocate tachometer to right side.
Install speedometer into left hole, placing the
-
cushion between the speedometer and the hood.
- Route speedometer cable through plenum
- Route speedometer cable as illustrated. Tighten cable ends.
- Install plenum
Using cable ties provided (3) secure cable in places
-
illustrated by a l.
Lay speedometer cable in the channel of the nosepan.
-
Attach with three clips as snown. Use the "J" clip and rivet to
secure the wire to the nosepan channel where indicated.
PN 9916166 Rev 01 8/00
Printed in U.S.A.
2001 PRO X 440 / XCF SP
Route Cable through left
hinge hole at this point.
Install "J" retainer (PN 7080963)
using rivet (PN 7621435)
Install three "U" Clips
Route through hole in plenum
Dark line indicates speedometer cable routing.
l
l
Advertisement
