Table of Contents
Advertisement
CHAPTER FOUR : MAIN MENU
6) Check the current default gateway of NVR;
7) Check the current DNS server of NVR;
8) Save current information.
SECTION B: WIFI SETTING
1) Check the current status of WIFI SETTING;
2) Enable or Disable the function of DHCP;
3) Set the start IP port;
4) Set the end IP port;
5) Set the sub-net mask;
6) Set default gateway;
7) Set DNS server 1;
8) Set DNS server 2;
9) Check the current SSID of NVR;
10) Check the current password of NVR;
11) Check the current signal type
12) Set and save current WIFI setting.
- 28 -
Advertisement
Table of Contents
