Advertisement
ASSEMBLY INSTRUCTIONS
EB-1
Elliptical 2 in 1
Exercise Bike
Thank you for your purchase of this Harvil product!
We work around the clock and around the globe to ensure that Harvil products
maintain the highest possible quality. However, in the rare instance that your
product is defective or missing parts, contact your retailer to submit parts
requests or warranty claims. Please read the warranty information at the back
of these assembly instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
The information contained in this manual is subject to change without notice.
EB-1
1
Advertisement
Table of Contents
Related Manuals for Harvil EB-1
Summary of Contents for Harvil EB-1
- Page 1 Exercise Bike Thank you for your purchase of this Harvil product! We work around the clock and around the globe to ensure that Harvil products maintain the highest possible quality. However, in the rare instance that your product is defective or missing parts, contact your retailer to submit parts requests or warranty claims.
- Page 2 PARTS INDENTIFIER(NOT TO SCALE) EB-1...
- Page 3 P L AS T IC INS E R T S ADDL E S ADDL E P OS T K NOB B US HING ME T E R P OS T HANDL E B AR C ONNE C T ING P L AT E ME T E R EB-1...
-
Page 4: Care And Use
A. Make sure you have enough space for assembly. B. Use the present tools for assembly. C. Before assembling please check whether all needed parts are available (on Page 2 of this instruction manual, you will nd a diagram with all single parts marked with numbers) EB-1... - Page 5 INC OR R E C T through the pedal tubing and the crank- shaft. If the hinge bolt is connected to the crankshaft at an angle, damage to both the hinge bolt and the crankshaft may occur. INC OR R E C T EB-1...
- Page 6 F IG .4 the main frame between the lower handlebars. As with the dual-action mode, set both handlebars at the same comfortable height and secure them in place with the Locking Knobs (No.28). EB-1...
- Page 7 Then re-strap the belt at the buckle on the top of the fan wheel just beneath the center beam. The more length you allow on the friction belt the less friction it will cause (less tension). Re-adjust the tension knob after you nished. EB-1...
-
Page 8: Reversible Movement
MAKE SURE YOU HAVE TIGHTENED ALL THE BOLTS AND NUTS WELL BEFORE BEGINNING YOUR WORKOUT. NOTE: THE END CAP ON THE FRONT STABILIZER TUBE IS REMOVABLE SO YOU CAN MOVE YOUR TRAINING BIKE. THE END CAP ON THE REAR STABILIZER CAN ADJUST THE PARALLELISM. EB-1... -
Page 9: Button Functions
Now mount your Elliptical Bike and turn the pedals. If you nd it is now too tight, go back to the friction belt buckle and loosen the belt slightly. EB-1... -
Page 10: Day Limited Warranty
Harvil reserves the right to make substitutions to warranty claims if parts are unavailable or obsolete. Harvil shall not be liable for loss of use of the product or other consequential or incidental costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of injury resulting from the use of this product.
Need help?
Do you have a question about the EB-1 and is the answer not in the manual?
Questions and answers
The bolts that conmect the pedals to the handlebars keep backing off and falling off. What am I doing wrong.