19-1102.fm Page 27 Friday, March 19, 1999 4:08 PM
Using the Transmit Melody Alert
Follow these steps to select a transmit melody.
1. Turn on the radio. Make sure you are not in memory mode.
2. Hold down
FUNC
number from
1
to
3. Press
or
to display the number of the melody you want
to use. Each time you change the setting, the transceiver
sounds the selected melody.
4. Press
to lock your setting and exit the menu.
PTT
Your selection is stored even after you turn off the radio.
To transmit the selected melody alert, press
.
PTT
Using the Receive Melody Alert
To have the transceiver play the selected transmit alert melody
when it receives a call rotate
a hissing sound. Then slowly rotate
noise stops. Turn off the radio then press
radio.
appears.
The first time the radio receives a call, it plays the selected melo-
dy and turns off the feature. To turn on the melody again, hold
down
then turn off the radio and then on again.
and press
four times
T.SET
5
appear.
counterclockwise until you hear
SQ
clockwise just until the
SQ
while you turn on the
MEL
and a
.
while pressing
27