Table of Contents
Advertisement
Call 104 preset: Clear the relationship between magnification lens with the zoom current position.
17. Auto-tracking settings
When the zoom function is open, For the best auto-tracking,
dome like the PART 16.
Set / Add No. 96 preset: Close Auto-tracking.
Set / Add No. 98 preset:
Set / Add No. 100 preset:
Set / Add No. 101 preset :
Call No. 97 preset :
Start the tracking scene 1 the corresponding preset 88.
Call No. 98 preset :
Start the tracking scene 2 the corresponding preset 89.
Call No. 99 preset :
Start the tracking scene 3 the corresponding preset 90.
Call No. 100 preset :
18.IR light settings
A. set the brightness with multiple relationship between
[133]+[PRESET]+[N]+[PRESET] (1X)... [N]+[PRESET](20X) +[133]+[PRESET]
Set the 133 preset + set 1X times the brightness value N+ set 2X times N value... + set 20X times the brightness value N+ is
set 133 preset end, (where N is respectively 1, 10,20, 30, 40, 50, 60, 70, 80, 90, 100, a total of 11 levels, setting 1 preset point infrared light is
off, set the 10 preset light degree is 10%, set the 20 preset light degree 20%...Set the 100 preset light degree is 100%)
B.IR light brightness with camera multiple relationship (Middle IR lights)
[134]+[PRESET]+[N]+[PRESET] (1X)... [N]+[PRESET](20X) +[134]+[PRESET]
Set the 134 preset + set 1 times the brightness value N+ set 2 times N value... + set 20 times the brightness value N+ is
set 134 preset end, (where N is respectively 1, 10,20, 30, 40, 50, 60, 70, 80, 90, 100, a total of 11 levels, setting 1 preset point infrared light is
off, set the 10 preset light degree is 10%, set the 20 preset light degree 20%...Set the 100 preset light degree is 100%)
C.IR light brightness with camera multiple relationship
[135]+[PRESET]+ (1X) [N]+[PRESET]... (20X)[N]+[PRESET]+[135]+[PRESET]
Set the 135 preset + set 1X
set 135 preset end, (where N is respectively 1, 10,20, 30, 40, 50, 60, 70, 80, 90, 100, a total of 11 levels, setting 1 preset point infrared light is
off, set
the 10 preset
light degree
The maximum brightness settings for all lamp: [set No. 136 preset + set 50-100 preset, (where 50-100 corresponds to the maximum
brightness brightness 50%-100%)]
An
infrared detection
sensitivity values lower easily switch
Call 101
preset: The user can arbitrarily set
Call 102 preset: The user can arbitrarily set the distance light according to the camera multiple switching mode 2 Call 149 preset: for camera
mandatory color model,Set 150 pre
Part
7【Common functions operating Express
Dome Function Express
1.
Preset NO.
Speed dome / camera control content
110
Left Limit position
111
Right Limit position
112
Start left and right limit scan
112
Save left and right limit scan
110
Set the speed of left and right scan ( Page 12)
115
Start the first programmed tour 1-16 scanning
116
Start the second programmed tour17-32 scanning
(only apply to atuo-tracking camera)
Set the middle
sensitivity.
Zoom close in
Auto-Tracking.
Zoom open in Auto-Tracking.
Start the tracking the first tour(No.1-No.16 Preset) .
times the brightness value N+ set 2X times N value... + set 20X times the brightness value N+ is
is
10%, set
the 20 preset light degree
threshold setting: [Set
No.
the distance light according to the camera multiple switching mode 1
Please
match the lens of the camera ZOOM ratio with the speed
Set / Add No. 97 preset :
Set / Add No. 99 preset :
Set the high sensitivity
camera (Far IR lights)
20%...Set
137 preset +set
36-100 preset, (where
to
the infrared
Call preset
¤
¤
¤
¤
Set the low sensitivity
the 100 preset light degree
36-100 corresponding IR
】
Set preset
¤
¤
¤
is
100%)
mode)
Hide quick links:
Advertisement
Table of Contents
