Yucheng P02 Series User Manual

PTZ SPEED IP CAMERA USER'S MANUAL
Part 1 【 Notice】
1.Handle with care while transportation.
Do not abuse the camera. Avoid pressing striking, shaking, etc. The camera could be damaged by improper handling or storage.
2.How to deal with malfunction
If smoke or unusual smell comes out or malfunction occurs, SHUT DOWN the power, STOP using the camera. Ask a qualified service
person for servicing.
3. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for
servicing.
4. Do Not put other objects into the camera
No metals or combustible materials inside. If water or other liquid floats in, SHUT DOWN the power immediately, and ask a qualified
service person for servicing. Avoid raindrops and sea water.
5. Handle the camera with care while placing it
Do Not drop the camera or strike or shake it in 8. to avoid the unnecessary damage.
6. Install the camera where it's away from power source and magnetic fields.
Jamming pictures will be caused if the camera is installed near TV, radio, magnetic device, motor, transformer and loud-speaker, etc.
7. Avoid moisture, dust and high temperature
Do Not install the camera near smoke, steam, or dusty and over-heated places.
8. Do not use strong or abrasive detergents
when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent
and wipe gently. Care should be taken not to scratch the dome when wiping it.
9. Never face the camera towards the sun, or it may damage the CCD.
10. Operate the camera under the required conditions
※ Warning: Do Not install the indoor speed dome outdoors.
1.Auto-recognition zoom camera
Our Intelligent speed dome is auto-recognizable for SONY, HITACHI, SANYO, SAMSUNG, LG, CNB, CANON etc. and some
◆
domestic zoom cameras. (Other zoom cameras should provide their protocols)
2.Built-in Decoder/PAN/TILT
Adopt the ARM design of high performance with high, stable stability. Setting data will not be lost when power-off.
◆
Precision stepper electrode drive smooth operation, accurate positioning
◆
Infinitely variable speed Continuous 360° pan, tilt turning(180° auto flip), without any blind area.
◆
Automatic identification PELCO-D, PELCO-P Control Protocol
◆
Automatic identification Baud rate 2400,4800,9600
◆
Broadcast address 255 and Invalid address 0, Convenient control
◆
Software address ,Software Baud rate ,Software Protocol function ,Convenient setting
◆
256 preset positions, 5 automatic programmable cruising function which can store 16 presets, including guarding point, cruising group,
◆
Part 2 【Product Features】