Advertisement
WYSAAVDX7
Control No.
HD-AG-A100174
before exporting or re-exporting, necessary procedures for export or re-export of this Product which is
required by applicable laws and regulations, and if necessary, you have to obtain necessary and appropriate
approvals or licenses from governmental authority at your own risk and expense.
q. Japan Regulatory Information
This product with a specific antenna is a radio system approved for Type Approval.
Please follow the instructions below on designing your product.
a) Please notify clearly below sentences, on your product or in the product manual.
This product has a radio system which was approved as a radio station in a low power data
communication system based on the Radio Law and the Telecommunication Business Law.
Name of the radio system: 001WWCA1266
b) Please design your set structure in which this module can be easily attached and taken off by end users.
c) This module is certified by Type Approval as the device which has SDIO Interface.
Please do not use other purposes except that of certified.
Please contact TAIYO YUDEN for more details of purposes of this product.
d) This product is displayed the following actual indication.
2)
1)
1) 2.4
: Represents radio equipment using the 2.4GHz band.
2) DS
: Represents modulation DS-SS system.
3) OF
: Represents modulation OFDM system.
4) 4
: Represents estimated interference-causing radius to premises radio stations for RFID.
5) ■ ■ ■
: Indicates that the equipment can use the entire band and is capable of avoiding
the band used by RFID systems.
This equipment shares a frequency band with a wide range of equipment: e.g. industrial, scientific,
and medical equipment such as microwave ovens, premises radio stations (radio stations
requiring licenses), and specified low-power radio stations (radio stations not requiring licenses)
for RFID used for rectory production lines as well as amateur radio stations (radio stations
requiring licenses).
1. Before use, confirm that no premises radio stations and specified low-power radio stations for
RFID or amateur radio stations operate in your vicinity.
2. In the event that this equipment causes or halt radio wave emission and contact us at the
information indicated below for consultation on interference avoidance measures (e.g.,
partition installation).
3. Contact us if this equipment causes harmful interference to any specified low-power radio
stations for RFID or amateur radio stations or if other problems arise.
Control name
(3/4)
General Items
TAIYO YUDEN
13-Nov.2013 Ver.0.9
TAIYO YUDEN
Tentative
3)
4)
5)
5/16
Advertisement
