Advertisement
Operation and Powering up
Your new Menuetto is ready for operation after all the cables have been installed.
Menuetto is provided with functional and simple front panel controls with very logical
and intuitive layout.
We advise to always check volume knob position before powering up the device.
You should turn the volume off (counterclockwise) for the start and to increase the
volume (turn the volume knob clockwise) after powering up the device.
DO NOT unplug interconnect or loudspeaker cables while the power remains ON.
Never remove/insert AC line cord when the unit is ON.
Unplug the power cord of this product from the wall outlet during lightening storms or if
you are not going to use it for a long period of time.
Front Panel Features
Power switch: Two position rocker switch with green LED.
Upper position: ON.
Lower position: OFF.
Green LED: when lit indicates that the device is powered ON.
Volume knob: Rotate clockwise to increase volume for both channels.
Source knob: Four positions source selecting knob.
Rear Panel Features
Speaker terminals: for connection of your speaker cables.
Input terminals: for connecting your interconnect cables.
IEC Power connector: for connecting power cord.
Advertisement
