Advertisement
Quick Links
Advertisement
Related Manuals for Dayens Menuetto
Summary of Contents for Dayens Menuetto
- Page 1 Menuetto Stereo Integrated Amplifier User’s manual www.dayens.rs rev.M.1...
- Page 2 Please make sure that cables aren’t shorted at speakers end. Speaker cables should be hand tightened down at the speaker output terminals, without excessive force. Menuetto is attended to work with most loudspeakers with impedance between 4 and 16 Ohm. We recommend single amp – single wire connection.
- Page 3 Operation and Powering up Your new Menuetto is ready for operation after all the cables have been installed. Menuetto is provided with functional and simple front panel controls with very logical and intuitive layout. We advise to always check volume knob position before powering up the device.
- Page 4 After expiry of the warranty period we will provide replacement parts and service. All repairs performed by Dayens after expiry of the warranty period will be charged to the owner and the cost will include only serviced/replaced parts and components and will carry a 180-day warranty on parts and labor.
-
Page 5: Specifications
Specifications This section describes the basic specifications of the Menuetto at the time of writing this manual. Technical specifications Power (Watt): 2x50 / 8 Ohm 2x70 / 4 Ohm Number of inputs: Input type: RCA (unbalanced) Frequency response (Hz): 1Hz - 200kHz SNR (dB): >92...