Replacement
4.24 Label & Foil 0.0 mm CU label Tray
Follow the 3.1 – 3.3 Disassembly instructions!
Prepare the new Label & Foil 0.0 mm CU label Tray.
Follow the 5.5 – 5.7 Reassembly instructions!
Label and Foil 0.0 mm CU label Tray should be scraped
after removal!
Read the information on both sides of the old Label and/or
write the information into the 'Label Print Solution' program.
INSTALLATION
Check that the label format is properly loaded in the Zebra
printer and write a new Label using the 'Label Print Solution'
software.
1282-8956 Rev 1
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
50(73)