Product Documentation - Pentek 52791 Getting Started Manual

Page 14
Documentation for This Product
Any of the documentation listed below that is not supplied with the Model 52791 can
be found at www.pentek.com.

Product Documentation

Some manuals are used for more than one Pentek product. The manuals listed below are
all used for Model 52791.
Part No Type / Description
800.52791 Installation Manual - Model 52791 L-Band Tuner with 2-Channel 500 MHz A/D and 2 DDCs on
3U VPX Carrier
800.71791 Operating Manual - Model 71791 1-Ch L-Band Tuner with 2-Channel 500 MHz A/D and 2 DDCs
XMC Module
809.7x791 Supplemental Manual - Vendor Data Sheets for Model 7x730 Series Operating Manuals
- GateFlow User Manual
- Programmer's Reference - ReadyFlow Board Support Libraries
Model 4994A ReadyFlow BSP for Linux − Installation and Getting Started Guide
-
Model 4995A ReadyFlow BSP for Windows − Installation and Getting Started Guide
-
a. Contact Pentek for part number.
Other Technical Documentation
Catalogs:
• Pentek Product Catalog
• Product Selection Guide:
Handbooks:
• Critical Techniques for High−Speed A/Ds In Real−Time Systems
• High−speed Switched Serial Fabrics Improve System Design
• Putting FPGAs to Work For Software Radio
• Software Radio Handbook
Receive the Latest Information with YourPentek
To receive automatic notification about updates to this product's documentation, set up
a YourPentek profile at http://www.pentek.com/go/ypmanual. YourPentek will also
notify you of any lifecycle changes for this product.
Rev. 1.0
a
http://www.pentek.com/selectguide/SelectGuide.cfm
Model 52791 Getting Started Guide
a
a
a