Table of Contents
Advertisement
2. Playing your TiVo® files
2.1 Connect to External AV Device
2.1.1 Connect Video Cable
You must connect MEDIAGATE T1 to an AV device (such as a TV set) in order to transfer your TiVo® files.
MEDIAGATE T1 supports Composite, S-video, and Component video connections. Use the video connection that your
TV supports. Normally, your TV supports a composite video connection; a composite video cable is included in this
package.
ü If a normal screen is not visible after connecting video cable, please check the following:
1. "TV "– Switch to Video Input Mode: Turn on TV and switch to video input mode, same as video connection. See TV users
manual for more info.
2. "MEDIAGATE T1" – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever [VIDEO] is pressed, the
video output signal is changed.
3. After you see a normal screen, you must save video configurations of MEDIAGATE T1. See "1.2.1 Video Setup".
?áComposite: Yellow RCA cable. (Supplied)
Yellow
(CVBS)
?áS-Video: Black rounded cable (not supplied)
S-VIDEO
?áComponent: Y, Pb, Pr component cable (not supplied)
Red
(Pr)
Blue
(Pb)
Green
(Y)
31
Connect to Composite
Yellow
(CVBS) Jack of TV
(CVBS)
Connect S-Video
Jack of TV
Red
Connect Pr Jack of TV
(Pr)
Blue
Connect Pb Jack of TV
(Pb)
Green
Connect Y Jack of TV
(Y)
Advertisement
Table of Contents
