Table of Contents
Advertisement
1.2 Basic Setup
1.2.1 Video Setup
IMPORTANT! The MEDIAGATE T1 video output mode and TV set input mode must be on the same setting.
ü If you cannot see a normal screen after connecting the video cable, please check the following:
1. "TV "– Switch to Video Input Mode: Turn on TV and switch to video input mode, same as video connection. See TV users manual
for more info.
2. "MEDIAGATE T1" – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever [VIDEO] is pressed, the video
output signal is changed.
3. After you see a normal screen, you must save the video configurations of MEDIAGATE T1.
MEDIAGATE T1
TV Video
Input Mode
TV Out: NTSC C/S-Video
(HD Component OFF)
Normal Video
TV Out: PAL C/S-Video
(HD Component OFF)
TV Out: NTSC C/S-Video
(HD Component OFF)
S-Video
TV Out: PAL C/S-Video
(HD Component OFF)
TV Out: NTSC C/YPbPr
(HD Component OFF)
Component 480i
TV Out: PAL C/YPbPr
(HD Component OFF)
Component 480p
HD Component Out On 480p
Component 720p
HD Component Out On 720p
Component 1080i
HD Component Out On 1080i
ü NTSC, PAL: Standard of TV Output. Select the proper setting for using in your country.
Connection Jack
Video
of TV, MEDIAGATE
Output Mode
CVBS or Composite Jack
(Generally Yellow Jack)
Component 3 Jack
* Y (Green), Pb(Blue), Pr(Red)
Video Cable Type
T1
Yellow RCA Cable
S-Video Cable
S-Video Jack
* Black rounded
Component Cable
* Y (Green), Pb(Blue), Pr(Red)
9
(Supplied)
Advertisement
Table of Contents
