Download Print this page

Pogo RipFlash TRIO EVR-100 User Manual page 10

Pogo's digital voice recorder user guide evr-100

Advertisement

You can recharge the player by connecting it to a USB port from the PC. A blinking icon
indicates the battery is in need of recharging.
It is possible to recharge even if the battery is not fully discharged.(No need for
Note
discharging)
To extend the life of your battery, recharge the battery while the icon is still blinking.
To discontinue recharging, select the following mode(s) in order:
[SYSTEM]-[CHARGE]-[OFF].
The battery takes 5~6 hours to fully-recharge.
Connect the USB cable to the USB connector
(port) of the PC when the PC is powerd on(as
shown in the picture on the left.)
Connect the USB cable to the USB power
converter.
Connect the USB cable to the USB port of
PC when the player is powerd on.
Press the MODE button on the player and
select the following mode(s) in order:
[SYSTEM]-[CHARGE]-[ON].
Charging will begin.
10

Advertisement

loading

This manual is also suitable for:

Ripflash trio