For Use With Windows 7, 8.1, And 10 - AudioQuest DragonFly Red Instructions Manual

For Use with Windows® 7, 8.1, and 10
Setup for USB
Using "Control Panel" "Sound" settings to send audio to DragonFly Red, while keeping
alerts and sound effects on the computer's speakers:
1. Insert DragonFly Red into your
computer's USB port.
2. Go to Start menu and launch
"Control Panel. "
3. Open "Hardware and Sound" panel.
4. Select "Sound. "
5. For USB: The AudioQuest DragonFly
Red is added as "Speakers. " Ensure it is
the "Default Device. " Select "Speakers. "
6. Click "Properties" button for more
setup options.
a. Click "Advanced" tab. Use the
dropdown menu to choose the
sample rate—most likely
24-bit/44100.0 Hz.
2
3
6b
5
6
6a
13