Table of Contents
Advertisement
2.9
System fan
This section describes how to remove the system fan in the event that you need to install or
remove previously installed or new system components, or when the system fan needs to be
replaced because it was damaged or became defective.
To remove the system fan:
1.
Disconnect the system fan cable from
the CHA_FAN1 connector on the
motherboard.
2.
Remove the four system fan screws at
the rear panel. Keep the screws for later
use.
Hold the system fan with one hand
while removing the system fan
screws.
3.
Remove the system fan.
Follow the previous instructions in
reverse order if you want to reinstall
the system fan.
2-22
Chapter 2: Hardware Setup
Advertisement
Table of Contents
