Table of Contents
Advertisement
Installing 2.5-inch HDD/SSD
To install a 2.5-inch HDD/SSD:
1.
Remove the side cover of the chassis. Refer to the Removing the side cover section
for more information.
2.
Prepare the 2.5-inch HDD/SDD and the bundled set of screws.
3.
Lay the system on its side on a flat and stable surface.
4.
Locate the HDD cage lock, press it up (A), then swing the HDD cage outwards (B).
5.
Align and insert the 2.5-inch HDD/SSD into the drive bay as shown. Push it all the way
until its screw holes align with the holes on the drive bay.
HDD cage lock
ASUS ESC300 G4
HDD cage
Matching screw holes
2.5-inch HDD/SSD
2-15
Advertisement
Table of Contents
