E Series two-way loudspeakers and subwoofers are designed for externally powered operation. Pass-throughs permit connection to multiple loudspeakers. The
two-way models feature internal passive crossovers for full-range operation. To use them with subwoofers, use an active crossover and separate amplification to
split the subwoofer frequencies and the remainder of the audio spectrum.
PLD and GXD Series amplifiers have E Series voicings available in their presets and loudspeaker profiles. TouchMix digital mixers also have E Series voicings
available, for use in systems that don't have PLD or GXD Series amplifiers.
E Series E10, E12, E15, E215 Block Diagram and Input Plate
E Series E18sw, E218sw Block Diagram and Input Plate
Multi-use loudspeaker all-weather 80 mm (3.1”) two-way with shielded woofer and neodymium tweeter with 70v/100v transformer equipped (bypassable) (9 pages)
Summary of Contents for QSC E10
Page 1
PLD and GXD Series amplifiers have E Series voicings available in their presets and loudspeaker profiles. TouchMix digital mixers also have E Series voicings available, for use in systems that don't have PLD or GXD Series amplifiers. E Series E10, E12, E15, E215 Block Diagram and Input Plate DEEP LPF...
Page 2
Connections Full Range Stereo System Amplifier Speaker GXD Series power amplifier preset: P6 ST E10 (stereo E10) GXD Preset P10 ST E12 (stereo E12) ST SAT FULLRANGE P12 ST E12 DANCE (stereo E12 dance) P14 ST E15 (stereo E15) Input...
Page 3
— Figure 5 — Dual Channel, Sub / Satellite System GXD Series power amplifier preset: P7 ST E10 + SUB To Right P8 ST E10 DANCE + SUB Satellite GXD Preset P11 ST E12 + SUB ST SAT nn HZ...
Page 4
F11 Dual bi-amp mode PLD Series power amplifier loudspeaker profiles: CH A • E18sw • E218sw CH B • E10 +SUB • E12 +SUB • E12 dance +SUB • E15 +SUB • E15 dance +SUB • E215 +SUB • E215 dance + SUB CH C •...
Suspending the Loudspeakers A pair of E10, E12, and E15 loudspeakers can be suspended using the M8 Suspension Kit M8 KIT W, which contains six eye bolts and six washers. To suspend an E215 loudspeaker, use the M10 KIT- , which contains three eye bolts.