Page 1
SOCKET T/478 CPU COOLER USER MANUAL MODEL 702997 MAN-702997-UM-1006-01...
Page 2
Thank you for purchasing the MANHATTAN Socket T/478 CPU Cooler, Model 702997 . For easy ® installation, simply follow whichever of the four sets of directions below is appropriate for your device. For AMD Opteron/K8 installation: 2. Apply an even layer 1.
Page 3
9. Connect the power 10. If applicable, attach 1 1. Installation is the speed controller. cable of the cooler to complete. the motherboard. For AMD K3 & Intel Pentium 3 installation: 3. With the frame off, fit 4. Place the main cooler 1.
Page 4
5. Position screws through 6. Set the frame on the 7 . Using the enclosed 8. If using a speed the clip and retention cooler (in whichever screws, connect the controller, connect it to holder, then tighten. direction space allows). frame to the cooler.
Page 5
For Socket 478 Intel Pentium 4 installation: 1. If applicable, remove 2. Attach the rear section 3. Apply an even layer 4. With the frame off, fit the the original retention of the P4 holder to the of thermal compound P4 clip on the metal nub motherboard underside.
Page 6
9. If using a speed 1 1. If applicable, attach 10. Connect the power 12. Installation is controller, connect it to the speed controller. cable of the cooler to complete. the fan’s power cable. the motherboard. For Socket T Intel Pentium 4 installation: 1.
Page 7
5. Place the main cooler 6. A little at a time, 7 . Set the frame on the 8. Using the enclosed unit on the CPU and fit tighten the clip’s cooler (in whichever screws, connect the the clip in place. screws till they’re snug.
Need help?
Do you have a question about the 702997 and is the answer not in the manual?
Questions and answers