Page 3 of 18 Table of Contents General Information .........................4 Back View ..........................4 Specifications ...........................5 Configuration Details ......................5 Technical Drawing FDSDIVCS-4-5 ..................6 Technical Drawing FDSDIVCS-4-10 ..................7 Pinout ............................8 Video Inputs & Video Outputs ...................9 Push Button Switches......................10 RS485 Control ........................11 Command Set ........................12...
Depending on the amount of outputs required would depend on which crosspoint switch is used. Back View FDSDIVCS-4-5 - The bottom row from left to right are outputs 1-5, the top row from left to right are inputs 1-4. FDSDIVCS-4-10 ...
1.5G HD-SDI Configuration Details The FDSDIVCS-4-5 and FDSDIVCS-4-10 can be configured: to re-select the last channel request for each output channel (default state) or set all outputs to a predefined input upon system power up or momentary loss of power.
Page 13 of 18 Installation Instructions All cabin entertainment equipment, such as the FDSDIVCS-4-5 or FDSDIVCS-4-10, should be installed on a non-essential bus and have a dedicated circuit breaker. It is necessary that a switch be installed on a non-essential bus and have a dedicated circuit breaker. It is necessary that a switch be installed in the cockpit so that the pilot can de-energize the entertainment system should it become necessary.
10/29/2014 MAN – FDFDSDIVCS-4-5(4-10) Page 16 of 18 Technical Support Should you have any questions concerning this product or other Flight Display Systems products, please contact our Product Support representatives at (470) 239-7421. Flight Display Systems 6435 Shiloh Road Alpharetta, GA 30005...
Limited Warranty All Flight Display Systems (FDS) products are warranted to be free from material or manufacturing defects for a period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for Government/Special Mission customers.