Connect The Wireless-B Usb Network Adapter - Linksys WUSB11 Quick Installation Manual

Connect the Wireless-B USB
2
Network Adapter
A
The Adapter comes with the
USB cable you will use to
connect the Adapter to your
PC.
Connect one end of the
included USB cable to the USB
port of the Adapter.
B
Connect the other end of the
USB cable to one of the USB
ports on your computer.
The Power LED should light up
when the Adapter is plugged
in.
C
If you are using Windows 2000,
you may see a Windows Digital
Signature warning. The Adapter
has been tested and found to
work with Windows, so click Yes
to continue.
D
Raise the antenna. Make sure
the antenna is positioned
straight up into the air, at a 90°
angle from the Adapter. This
will ensure optimum wireless
operating range and
performance.
A
C
D
5