Advertisement
RM-RE9000
Removing the remote controller
transmission board assembly (See Fig.4)
1.
Remove the rear cover.
2.
Remove the two screws C attaching the remote
controller transmission board assembly.
3.
Remove the connector CN201 connecting the main
board assembly to the remote controller transmission
board assembly.
Removing the main board assembly
1.
Remove the rear cover.
Remove the remote controller transmission board
2.
assembly.
3.
After taking off the screws D & E attaching the
volume knob and the rotary switch, remove their
knobs.
After taking off the nut F attaching the volume board
4.
assembly with a box-type driver, remove the volume
board assembly.
5.
After taking off the nut G attaching the rotary switch
board assembly with a box-type driver, remove the
rotary switch board assembly.
Remove the fourteen screws H attaching the main
6.
board assembly.
7.
Remove the connector CN103 connecting the main
board assembly to the volume board assembly, and
the connector CN301 connecting the main board
assembly to the rotary switch board assembly,
respectively.
Main board assembly
1-4
Main board assembly
(See Fig.5 to 7)
Fig.7
C
Fig.4
Rotary
switch knob
E
Rotary switch knob
G
F
Fig.6
H
Rotary switch board assembly
Volume board assembly
CN103
C
CN201
Remote controller
transmission board
assembly
Volume knob
D
Fig.5
Volume knob
CN301
H
Advertisement
