Advertisement
Disassembly method
Removing the rear cover (See Fig.1 to 3)
1.
Remove the four screws A on the front with a
hexagon wrench.
2.
Place the reverse side of the set upward.
3.
After taking off the cushions from the four places,
remove the four screws B at the inside of the rear
cover.
4.
Remove the screw B' at the inside of the battery
cover.
5.
Remove the rear cover and the front panel
assembly. (Because they should have been tightly
engaged, remove them with due care.)
6.
Remove the battery holder board assembly from the
rear cover by pulling it up.
A
Front panel assembly
B
B'
Rear cover
B
Fig.2
Battery holder board
assembly
RM-RE9000
A
Fig.1
B
B
Fig.3
1-3
Advertisement
